TP-Link AC1200 manual Dhcp Clients List, Address Reservation

Page 74

Archer C5 AC1200 Wireless Dual Band Gigabit Router

of time in minutes and the user will be "leased" this dynamic IP Address. After the time is up, the user will be automatically assigned a new dynamic IP address. The range of the time is 1

~ 2880 minutes. The default value is 120 minutes.

Default Gateway - (Optional.) It is suggested to input the IP address of the Ethernet port of the router. The default value is 192.168.0.1.

Default Domain - (Optional) Input the domain name of your network.

Primary DNS - (Optional) Input the DNS IP address provided by your ISP or consult your ISP.

Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides two DNS servers.

Note:

To use the DHCP server function of the router, you must configure all computers on the LAN as "Obtain an IP Address automatically".

4.9.2DHCP Clients List

Choose menu “DHCP → DHCP Clients List”, you can view the information about the clients

attached to the router in the screen as shown in

Figure 4-49.

 

 

 

 

 

 

Figure 4-49 DHCP Clients List

Client Name - The name of the DHCP client

MAC Address - The MAC address of the DHCP client

Assigned IP - The IP address that the router has allocated to the DHCP client

Lease Time - the lease time left for the address assigned to the DHCP client. After the dynamic IP address has expired, a new dynamic IP address will be automatically assigned to the user.

You cannot change any of the values on this page. To update this page and to show the current attached devices, click the Refresh button.

4.9.3Address Reservation

Choose menu “DHCP → Address Reservation”, you can view and add a reserved address for clients via the next screen (shown in Figure 4-50). When you specify a reserved IP address for a

- 64 -

Page 73 Page 75
Image 74
Page 73 Page 75
Contents Archer C5 Copyright & Trademarks FCC RF Radiation Exposure Statement Country Restriction Reason/remarkKorea Warning Statements NCC Notice & Bsmi Notice Safety Information Product Description AC1200 Wireless Dual Band Gigabit Router Yang Hongliang Product Manager of International BusinessContents Dhcp 111 Package Contents Overview of the router Flexible Access ControlSimple Installation Incredible SpeedMain Features ConventionsName Panel LayoutFront Panel IndicationRear Panel Archer C5 WPS/Reset System Requirements Installation Environment RequirementsConnecting the router Hardware Installation Quick Installation Guide TCP/IP ConfigurationQuick Installation Guide Please check the connection following these stepsLogin Windows WAN Connection Type Archer C5 AC1200 Wireless Dual Band Gigabit Router Quick Setup PPPoE/Russia PPPoE 11 Quick Setup L2TP/Russia L2TP Archer C5 AC1200 Wireless Dual Band Gigabit Router  Wireless Security  NoteArcher C5 AC1200 Wireless Dual Band Gigabit Router 14 Quick Setup Wireless 15 Quick Setup Finish Login StatusQuick Setup StatusNetwork 1 WAN Note Archer C5 AC1200 Wireless Dual Band Gigabit Router Archer C5 AC1200 Wireless Dual Band Gigabit Router Archer C5 AC1200 Wireless Dual Band Gigabit Router NSW / ACT nsw.bigpond.net.au Archer C5 AC1200 Wireless Dual Band Gigabit Router Archer C5 AC1200 Wireless Dual Band Gigabit Router Archer C5 AC1200 Wireless Dual Band Gigabit Router 2 LAN MAC Clone 11 MAC Address CloneDual Band Selection 12 Dual Band SelectionWireless 2.4GHz Wireless SettingsArcher C5 AC1200 Wireless Dual Band Gigabit Router 2 WPS Use the Wi-Fi Protected Setup Button Use this method if your client device has a WPS buttonII. Enter the client device’s PIN on the router Wireless Security III. Enter the router’s PIN on your client deviceEncryption You can select either Automatic, or Tkip or AES Archer C5 AC1200 Wireless Dual Band Gigabit Router Wireless MAC Filtering 25 Add or Modify Wireless MAC Address Filtering entry To modify or delete an existing entryWireless Advanced Wireless Statistics Wireless 5GHz Wireless Settings Archer C5 AC1200 Wireless Dual Band Gigabit Router 2 WPS 33 Add a New Device Wireless Security Archer C5 AC1200 Wireless Dual Band Gigabit Router Encryption You can select either Automatic, or Tkip or AES Archer C5 AC1200 Wireless Dual Band Gigabit Router 40 Add or Modify Wireless MAC Address Filtering entry To modify or delete an existing entry Wireless Advanced Wireless Statistics 44 Guest Network Wireless Settings Guest NetworkStorage Sharing 46 Modify User Account of Guest Network Dhcp Settings DhcpDhcp Clients List Address ReservationTo Reserve an IP address 51 Add or Modify an Address Reservation EntryUSB Settings  Note FTP Server Media Server To add a new folder, follow the instructions belowArcher C5 AC1200 Wireless Dual Band Gigabit Router Archer C5 AC1200 Wireless Dual Band Gigabit Router Print Server User AccountsTo add a new user account, please follow the steps below 11 NAT Forwarding Virtual ServersTo setup a virtual server entry 67 Add or Modify a Virtual Server EntryPort Triggering To add a new rule, follow the steps belowFind the desired entry in the table To assign a computer or server to be a DMZ server Once the router is configured, the operation is as follows12.3 DMZ UPnP Security Basic SecurityAdvanced Security  Note Local Management 75 Local ManagementRemote Management Parental Control To add a new entry, please follow the steps belowAC1200 Wireless Dual Band Gigabit Router Access Control 79 Parental Control SettingsRule There are two methods to add a new rule Method One Archer C5 AC1200 Wireless Dual Band Gigabit Router 85 Quick Setup Create an Internet Access Control Entry 86 Add Internet Access Control Entry Method TwoHost 88 Add or Modify a Host Entry Target 92 Add or Modify an Access Target Entry 93 Schedule Settings Schedule94 Advanced Schedule Settings To add a new schedule, follow the steps belowAdvanced Routing Static Routing ListTo add static routing entries Other configurations for the entriesSystem Routing Table Control Settings Bandwidth ControlRules List Binding Settings 18 IP & MAC BindingTo add IP & MAC Binding entries, follow the steps below To find an existing entry, follow the steps belowARP List Comexe.cn Ddns To set up for DDNS, follow these instructionsDynamic DNS Dyndns.org Ddns 20 IPv6 Support 20.1 IPv6 Status DHCPv6 Server20.2 IPv6 Setup DHCPv6 Static IPv6 PPPoEv6  Get IPv6 Address Way Tunnel 6to4System Tools 118 The System Tools menu 116Time Settings To set time automatically DiagnosticTo set time manually To set Daylight SavingArcher C5 AC1200 Wireless Dual Band Gigabit Router Firmware Upgrade 122 Diagnostic ResultsFactory Defaults Backup & Restore RebootPassword System LogArcher C5 AC1200 Wireless Dual Band Gigabit Router Statistics Archer C5 AC1200 Wireless Dual Band Gigabit Router Icmp Appendix a FAQ Figure A-3 MAC Clone Want to use Netmeeting, what do I need to do?Figure A-5 Add or Modify a Virtual server Entry Figure A-7 Basic Security Want to build a WEB Server on the LAN, what should I do?Wireless stations cannot connect to the router Figure A-9 Virtual ServersAppendix B Configuring the PCs Install TCP/IP componentFigure B-3 134 Environmental and Physical WirelessGeneral Appendix D Glossary Archer C5 AC1200 Wireless Dual Band Gigabit Router

AC1200 specifications

The TP-Link AC1200 is a dual-band wireless router that stands out in the competitive market of home networking equipment. Combining performance, reliability, and affordability, this router caters to the needs of various users—from casual internet surfers to high-demand gamers.

One of the main features of the TP-Link AC1200 is its dual-band capability, offering both 2.4 GHz and 5 GHz frequency bands. The 2.4 GHz band provides a broader coverage area, making it suitable for browsing and streaming video from farther distances. In contrast, the 5 GHz band delivers faster speeds, making it ideal for online gaming and HD streaming, reducing lag and buffering.

With a total wireless speed of up to 1200 Mbps—300 Mbps on the 2.4 GHz band and 867 Mbps on the 5 GHz band—the AC1200 ensures efficient data transfer for multiple devices simultaneously. This is particularly beneficial in homes with multiple users who may be streaming, gaming, and browsing at the same time.

The TP-Link AC1200 employs advanced wireless technologies like 802.11ac, which enhances overall network performance and efficiency. This technology utilizes beamforming, a feature that helps direct the Wi-Fi signal towards connected devices rather than broadcasting it uniformly. This focused connection results in stronger and more stable signals, especially in larger homes or areas with interference.

Another notable characteristic is its four Gigabit Ethernet ports, allowing users to connect wired devices for a more stable internet connection. This feature is essential for activities that require a consistent connection, such as gaming or video conferencing. The WAN port also supports connecting to a modem, making it easy to set up a home network.

In terms of security, the TP-Link AC1200 is equipped with WPA/WPA2 encryption, protecting users’ data against unauthorized access. It also provides the option for parental controls, enabling users to manage and restrict internet access for specific devices, which can be particularly useful for families.

Finally, the TP-Link Tether app enhances user experience by simplifying the router's setup and management process. Through the app, users can control settings, monitor network activity, and troubleshoot issues, all from their smartphone.

In summary, the TP-Link AC1200 is a versatile router that balances speed, coverage, and security features, making it a solid choice for everyday internet users seeking dependable home networking solutions.
Top Page Image Contents