TP-Link MC112CS, MC100CM, MC111CS manual Link Fault Pass Through Function

Contents MC100CM MC110CS Fast Ethernet Media Converter MC111CS MC112CS WDM Fast Ethernet Media ConverterUser Guide COPYRIGHT & TRADEMARKS FCC STATEMENT CE Mark WarningIC STATEMENT This Class A digital apparatus complies with Canadian ICES-003CONTENTS ChapterPackage contents ¾ One AC-DC Power Adapter DC9V/600mA ¾ One User GuideThe following items should be found in your package ¾ One Converter ¾ One Purchasing GuideChapter 1 Introduction 1.1 Overview of the Converter1.3 Features 1.4 Connectors and Network Cables Supported1.2 Conventions 1.5.1 LED Indicators 1.5 Appearance IndicationName StatusIndication 1.5.2 Switch 1.5.3 Link Fault Pass Through Function With the Link Fault Pass Through function enabled optional with switch LFP, TP port and FX port of the same converter will inform each other the fault link status so that when one side of the link fails, the other side will force the link to shut down as soon as noticed. The procedure will be illustrated as shown below Chapter 2 Installation Guide 2.1 Fast Ethernet Media Converter2.2 WDM Fast Ethernet Media Converter Transmits and receives data on the same fiber You have to use MC111CS and MC112CS at the same time to cooperateChapter 3 Configuration 3.1 Installation Procedure Appendix Specifications