ZyXEL Communications PLA-400 manual Safety Warnings

Page 5

Safety Warnings

Safety Warnings

For your safety, be sure to read and follow all warning notices and instructions.

•Do NOT use this product near water, for example, in a wet basement or near a swimming pool.

•Do NOT expose your device to dampness, dust or corrosive liquids.

•Do NOT store things on the device.

•Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.

•Connect ONLY suitable accessories to the device.

•Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information.For devices that use any external cables or cords [e.g., not for wireless cards]

•Make sure to connect the cables to the correct ports.

•Place connecting cables carefully so that no one will step on them or stumble over them.

•Always disconnect all cables from this device before servicing or disassembling.

•Use ONLY an appropriate power adapter or cord for your device.

•Connect the power adapter or cord to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe).

•Do NOT allow anything to rest on the power adapter or cord and do NOT place the product where anyone can walk on the power adapter or cord.

•Do NOT use the device if the power adapter or cord is damaged as it might cause electrocution.

•If the power adapter or cord is damaged, remove it from the power outlet.

•Do NOT attempt to repair the power adapter or cord. Contact your local vendor to order a new one.

•Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning.

•Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.

•If you wall mount your device, make sure that no electrical lines, gas or water pipes will be damaged.

PLA-402 models only:

•Make sure that the cable system is grounded so as to provide some protection against voltage surges. (PowerLine Ethernet adapters (HomePlug device), Cable modems or routers)

PLA-4xx Series User’s Guide

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents PLA-4xx Series Page Intended Audience About This Users GuideRelated Documentation User Guide FeedbackIcons Used in Figures Document ConventionsSyntax Conventions Safety Warnings This product is recyclable. Dispose of it properly Table of Contents Part II Appendices and Index List of Figures NET Framework Installation PromptList of Figures PLA-4xx Series User’s Guide List of Tables List of Tables PLA-4xx Series User’s Guide Part Page Expand Your Network with the PLA-4xx Introducing the PLA-4xxOverview Coaxial Cable Networks with the PLA-402 Ways to Manage the PLA-4xxSecurity Setting Up Security PasswordsMultiple Networks Installing the Utility Installing the Configuration UtilityOverview of the Installation Process NET Framework Installation Prompt Click OK to complete the installation process Customer Information Input Install Begin Screen Page Managing Your PLA-4xx Example Network SetupConfiguration Screen Starting the Configuration UtilityPowerline Network Security Device Access Key DAKFollowing table describes the labels in this screen Printed on the label all caps and with dashes Powerline adapter before you can make changes to itFirmware Screen Files before you can upload them Network Info ScreenNetwork Info Screen About Screen Selection field of the Configuration screenManaging Your PLA-4xx PLA-4xx Series User’s Guide Overview Powerline Network Setup TutorialImportant Terms Accessing Your Powerline AdapterInternet Adding a Powerline AdapterClick Save and click OK on the pop-up Add New Adapters to Make a Second Network Setting Up a New Network with a New AdapterMaking a New Network with the New Adapter Splitting a Network into Two NetworksLocal/Remote Adapters on a Powerline Network Incorrect DAK or No DAK Adapters on a New Powerline Network TroubleshootingPowerline Network Setup Tutorial PLA-4xx Series User’s Guide PLA-400/402 LEDs and TroubleshootingPLA-470 PLA-401PLA-4xx does not turn on. None of the LEDs turn on Power and LED ProblemsLink LED does not turn on Configuration Utility ProblemsSignal on my powerline network is weak Powerline ProblemsLEDs and Troubleshooting PLA-4xx Series User’s Guide Appendices Index Page Product Specifications Appendix a Product Specifications Firmware Specifications Wall-mounting Instructions Cable Pin Assignments RJ-45 Connector Pin AssignmentsTrademarks DisclaimerConformité CE CE-KonformitätConformità CE Viewing CertificationsRegistration ZyXEL Limited WarrantyAppendix B Legal Information PLA-4xx Series User’s Guide Corporate Headquarters Worldwide Required InformationCosta Rica Czech RepublicFinland DenmarkFrance GermanyJapan IndiaKazakhstan MalaysiaPoland NorwayRussia SingaporeThailand SwedenUkraine United KingdomAppendix C Customer Support PLA-4xx Series User’s Guide Index SymbolsPWR LED

PLA-400 specifications

ZyXEL Communications PLA-400 is an innovative Powerline Ethernet adapter designed to extend network connectivity through your home's electrical wiring. This device is particularly beneficial for users who face challenges with Wi-Fi signals due to distance or physical obstructions like walls and furniture. The PLA-400 provides a reliable alternative, allowing users to take advantage of existing electrical infrastructure to establish a stable and high-speed internet connection.

One of the main features of the PLA-400 is its impressive data transmission rate. With support for speeds of up to 500 Mbps, this adapter allows for seamless streaming, gaming, and other bandwidth-intensive applications. This high-speed capability ensures that users can enjoy smooth internet experiences without the lag that typically accompanies slower connections.

The ZyXEL PLA-400 utilizes HomePlug AV technology, which is a standard for Powerline communication. This technology allows multiple devices to connect over the same electrical circuit without interference. The adapters are also equipped with advanced Quality of Service (QoS) features that prioritize bandwidth usage for latency-sensitive applications, ensuring that connections remain stable even when multiple devices are in use.

Another significant characteristic is the ease of installation. The PLA-400 features a plug-and-play design, enabling users to set up their network by simply plugging the adapters into electrical outlets. There is no need for complex configuration or installation procedures. Additionally, the device includes security features, including 128-bit AES encryption, which ensures that your data remains secure while being transmitted over the powerlines.

The accuracy of the connection and its reliability is further enhanced by the adapter's integrated power-saving features. When not in active use, the PLA-400 can enter a low-power mode, reducing energy consumption without sacrificing performance.

In summary, the ZyXEL Communications PLA-400 Powerline Ethernet adapter stands out for its high-speed performance, ease of use, and emphasis on security. With its reliance on HomePlug AV technology, this device is perfect for users looking to enhance their home networking experience while leveraging existing electrical wiring for optimal connectivity. Whether for casual browsing, streaming high-definition content, or online gaming, the PLA-400 is designed to meet diverse networking needs effectively.
Top Page Image Contents