Get started, Prepare the remote control

4 Get started

Caution

•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus.Write the numbers here: Model No. __________________________

Serial No. ___________________________

Prepare the remote control

Caution

•Risk of explosion! Keep batteries away from heat, sunshine or ﬁ re. Never discard batteries in ﬁ re.

•Risk of decreased battery life! Never mix different brands or types of batteries.

•Risk of product damage! When the remote control is not used for long periods, remove the batteries.

Note

•Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

2	3

1Open the battery compartment.

2	Insert two R03 or AAA batteries with	English
3	correct polarity (+/-) as indicated.	English
	correct polarity (+/-) as indicated.
	Close the battery compartment.

Turn on

1 Press .

»The unit switches to the last selected source.

To turn off the unit:

1 Press

again.

Find the correct viewing channel

1 Press to turn on the unit.

2Press DISC to switch to disc mode.

3Turn on theTV and switch to the correct video-in channel in one of the following ways:

•Go to the lowest channel on yourTV, then press the Channel Down button until you see the blue screen.

•Press the source button repeatedly on the remote control of yourTV.

Tip

•The video-in channel is between the lowest and highest channels and may be called FRONT,A/V IN,VIDEO, HDMI etc. See theTV user manual on how to select the correct input on theTV.

Select the correct TV system

Change this setting if the video does not appear correctly. By default, this setting matches the most common setting forTVs in your country.

EN 17