Troubleshooting

		ZyXEL AG-100 Quick Start Guide
		Troubleshooting
	PROBLEM	CORRECTIVE ACTION

	Windows does not	Make sure the ZyXEL AG-100 is properly inserted into the
	auto-detect the	CardBus slot and then restart your computer. Once the
	ZyXEL AG-100.	computer has restarted, check the status of the LEDs on the
		ZyXEL AG-100.

		Perform a hardware scan by clicking Start, Settings, Control
		Panel and then double-click Add/Remove Hardware. (Steps
		may vary depending on Windows version).
		Follow the on-screen instructions to search for the ZyXEL AG-
		100 and install the driver.

		Check for possible hardware conflicts. In Windows, click Start,
		Settings, Control Panel, System, Hardware and then click
		Device Manager. Verify the status of the ZyXEL AG-100 under
		Network Adapter. (Steps may vary depending on the Windows
		version).
		Install the ZyXEL AG-100 in another computer. If the error
		persists, there may be a hardware problem. In this case, please
		contact ZyXEL customer support at 800-978-7222 or on the
		web at http://www.us.zyxel.com.

PROBLEM