ENGLISH 15
S-Video / CVBS connection
•
•
If your TV is equipped with an S-Video input socket you can connect this socket to the REC OUT output socket (21 - lower row) of your DFR9000. For this, use an optional S- Video connection cable.
If your TV is equipped with a CVBS input socket you can connect this socket to the CVBS output socket (21) of your DFR9000. For this use an optional 1-cinch connection cable.
Notes:
–If your TV is equipped with progressive scan component video, connect an optional 3-cinch connection cable to the RGB sockets (22) of your DFR9000.
–For connection to a TV with an HDMI input socket see ‘Connecting HDMI equipment’.
4.3 Connecting analogue stereo audio equipment
TV
AUDIO OUT
DVD recorder
Game console
AUDIO OUT
For connection to analogue audio equipment, six input sockets (AUDIO:TV IN, GAME IN and DVD IN - 25) and two output sockets (REC OUT 25) are available.
Digital Surround Receiver DFR9000
Copyright protection
How to connect a plug
Mains plug
Copyright in the U.K
3 4 5 6 7 @ #
Index
System menu overview
Troubleshooting
Technical specifications
Helpline Warranty
Safety Precautions
Remove the AC power plug from the wall socket
Important information
DFR9000 features
Introduction
DFR9000
Packaging contents
Right display
Functional overview
Left display
Centre display
Rear view
Video 1 in R, G, B, S
Video 2 in R, G, B, S
Source selection buttons
Remote control
Digital in 1 / in 2 /
Status window
TV CH +
Opens and close the system menu
VOL +
Mute
Input signal indications
Displays
DTS 96/24 DTS 96/24 available
SCART/RGBS connection
Installation
Connecting to your TV
General remarks
Video / Cvbs connection
Connecting analogue stereo audio equipment
Connecting digital audio equipment Satellite Receiver
Connecting analogue multichannel equipment
Connecting digital Hdmi equipment
Connecting video equipment
Sacd player
Video connection
Receiver
Connecting speakers
Cvbs connection
General
General hints for positioning
Connecting the speakers
Positioning the speakers
If you wish to connect an active subwoofer
Connecting antennas
Connecting headphones
Inserting the batteries in the remote control
Connecting to the mains
Basic menu navigating
System menu
Positioning your DFR9000
Setting up the receiver
Switching on and off
Setting the speaker size and distance
Setting the speaker volume
Reassigning input sockets
Tips
Operating the amplifier
Selecting input sockets for recording
Playing sources
Recording from sources
Recording from the digital output
Tuning to radio stations FM, FM-M and MW band
Preset radio stations FM, FM-M and MW band
Operating the tuner
Storing DAB radio stations
Moving preset radio stations
Selecting preset radio stations
DAB radio stations
Moving DAB radio stations
Tuning to DAB radio stations
Surround modes
System menu overview
Configuration menu
Speakers menu
Balance menu
DAB Move
To 40 preset numbers are available
Move Preset
Stored stations
Picture menu you can adjust picture settings for the TV
Picture menu
Enhancement menu
10.7 A/V input menu
21, Game
Game Video
Game Audio
DVD + RW Video
Gain menu
Speaker problems Possible cause Solution
Troubleshooting
Receiver problems Possible cause Solution
Remote control problems Possible cause Solution
Tuner problems Possible cause Solution
Video problems Possible cause Solution
Recording problems Possible cause
Playback problems Possible cause Solution
Glossary
Hertz Hz
Video displays for TV, movies, and DVDs
By varying the frequency in response to the audio
Frequency
To refer to any 525/59.94 video system. See Mntsc Ohm
Phase
Sync signal Satellite receiver
Utilizes MP3 for audio and VP3 for video
Analogue video section input/output
Technical specifications
Audio section
DTS ES Matrix, DTS ES Discrete, DTS NEO6
General
Digital video section input/output
Rate of 32-96 kHz Fs
Tuner
Polska
Helpline
Page
Nombre, direccion y firma del distribudor
Inköpsdatum Anskaffelsesdato Kjøpedato Oatopäivä
Name,Anschrift und Unterschrift des Händlers
Naam, adres en handtekening v.d. handelaar