To obtain service | Peavey PV 3800 specs

SAVE THESE INSTRUCTIONS

1Save the carton and packing materials! Should you ever need to ship the unit, use only the original factory packing.

Forreplacementpackaging,callPeavey Customer Service Department directly.

2Read all documentation before oper- ating your equipment. Retain all doc- umentation for future reference.

3Follow all instructions printed on unit chassis for proper operation.

4Never hold a power switch or cir- cuit breaker in the "ON" position if it won’t stay there by itself!

5Do not use the unit if the electrical power cord is frayed or broken. The power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them.

6Always operate the unit with the AC ground wire connected to the elec- trical system ground. Precautions should be taken so that the means of grounding of a piece of equipment is not defeated.

7Damage caused by connection to improper AC voltage is not covered by any warranty. Mains voltage must be correct and the same as that print- ed on the rear of the unit.

8Do not ground any hot (red) terminal.

Never connect a hot (red) output to ground or to another hot (red) output!

9Power down and disconnect units from mains voltage before making connections.

10Do not drive the inputs with a sig- nal level greater than that required to enable equipment to reach full output.

11Do not run the output of any amplifier channel back into another channel’s input.

Do not parallel- or series-connect an amplifier output with any other amplifier output.

Peavey is not responsible for dam- age to loudspeakers for any reason.

12Do not connect the inputs or out- puts of amplifiers to any other voltage source such as a battery, mains source, or power supply, regardless of whether the ampli- fier is turned on or off.

13Connecting amplifier outputs to oscil- loscopes or other test equipment while the amplifier is in bridged mono mode may damage both the amplifier and test equipment!

14Do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid.

15Do not block fan intake or exhaust ports.

Do not operate equipment on a surface or in an environment which may impede the normal flow of air around the unit, such as a bed, rug, weathersheet, carpet or com- pletely enclosed rack.

16If the unit is used in an extremely dusty or smoky environment the unit should be periodically blown free of foreign matter.

17Do not use the unit near stoves, heat registers, radiators or other heat-producing devices.

18The equipment power cord should be unplugged from the outlet when left unused for a long period of time.

Service Information

Do not remove the cover!

Removing the cover will expose you to potentially dangerous voltages. There are no user-serviceable parts inside.

Equipment should be serviced by qualified service personnel when:

A.The power supply cord or the plug has been damaged.

B.The equipment has been exposed to rain.

C.The equipment does not appear to operate normally or exhibits a marked change in performance.

D.The equipment has been dropped or the enclosure damaged.

To obtain service:

contact your nearest Peavey Service Center, Distributor, Dealer or contact Peavey at 601.483.5365 USA or visit www.peavey.com for additional information, email tech- serve@peavey.com

PV 3800 specifications

The Peavey PV 3800 is a powerful and versatile amplifier designed for professional audio applications. It is particularly popular among musicians, DJs, and sound reinforcement professionals who need reliable performance in various settings. This amplifier is known for its robust build quality and exceptional sound reproduction, making it a trusted choice in the world of live sound.

One of the standout features of the PV 3800 is its impressive power output. With 3,800 watts of peak power, this amplifier can easily drive large speaker systems, delivering clear and powerful audio even at high volumes. It provides 1,900 watts at 4 ohms in stereo mode, which ensures that it can handle demanding audio environments without distortion or loss of clarity.

Additionally, the PV 3800 is equipped with Peavey’s patented DDT speaker protection circuit. This technology helps prevent speaker damage by automatically detecting when the amplifier is being driven beyond its limits and adjusting the output accordingly. This feature is invaluable for live performances, where fluctuations in sound levels can occur, and it protects both the amplifier and the connected speakers.

Another key characteristic of the PV 3800 is its dual-channel design, which allows for multiple audio sources to be amplified simultaneously. Each channel features its own independent volume control and input options, providing flexibility for a variety of audio setups. Whether used in a simple two-speaker system or a complex multi-speaker arrangement, the PV 3800 can adapt to the specific needs of the user.

The amplifier's rear panel includes extensive connectivity options, such as XLR and 1/4-inch inputs, making it compatible with a wide range of audio equipment. Additionally, the PV 3800 features a fan-cooled design that helps maintain optimal operating temperatures during long performances, ensuring reliability and longevity.

In terms of size, the PV 3800 is notably portable, allowing for easy transport between gigs. Its durable construction means it can withstand the rigors of touring and live use, making it an excellent investment for professionals who need gear that can keep up with their demanding schedules.

In summary, the Peavey PV 3800 stands out for its powerful performance, innovative technologies, and user-friendly features. With its ability to deliver high-quality audio in a reliable and robust package, it continues to be a popular choice among audio professionals looking for a dependable amplifier.