P841C
5.1.2Enet Clear Command
enet clear
Type this command to clear P841C and the subscriber’s VDSL modem’s Ethernet statistics (if link is up).
5.1.3Enet Speed (ltnt) (speed) Command
enet speed (ltnt) (speed)
Type this command to set the Ethernet port speed of the P841C (with “lt”) or P841 (with “nt”). P841C speed is displayed if you just type “enet speed”.
P841C>enet speed enet speed(LT): Auto
Figure 5-2 Ethernet Speed
Speed index number | Speed/Flow Control | |
|
| |
0 | Auto Negotiation | |
|
|
|
1 | 10 | Mbits/s, Half Duplex |
|
|
|
2 | 10 | Mbits/s, Full Duplex |
|
| |
3 | 100Mbits/s, Half Duplex | |
|
| |
4 | 100Mbits/s, Full Duplex | |
|
|
|
5.1.4Enet full duplex Fctrl (ltnt) [onoff] Command
enet full duplex fctrl (ltnt) [onoff]
Type this command to set the Ethernet port flow control or show the Ethernet port flow control status (without “on” or “off”). By default, flow control is on for full duplex Ethernet connections and off for half duplex Ethernet connections.
P841C>enet fctrl
enet full duplex flow control(LT): on
Figure 5-3 Ethernet Flow Control
5.1.5Enet Monitor [onoff] Command
enet monitor [onoff]