Pwr

If the webpage and telnet function does not reply within one minute. Please unplug the “To Radio” and “To LAN” cable and then unplug the power cable.

After that, wait 5 seconds, please plug in the power cable first and then “To Radio”, “To LAN” respectively. It is recommended that you set the parameters in your office without connecting any antenna to each unit. After the settings are completed, you may move the BU and RU units together with the antennas to the sites for antenna alignment. The AK-100 is designed to tune the focus of the radio beam width. To align the antenna, please connect the RS-232 cable to the BU and RU connector before turning on the power of POE. It is recommended that you start adjusting the position of antenna on the BU site. In the mean time, please note that the antenna of RU site should be fixed while you adjust the position of the BU antenna.

The system data rate will drop to 6Mbps while using AK-100 to align the A-6000. After the alignment is completed, it is required to reboot both BU and RU for regular data rate recovery. To do the alignment, follow the steps as below:

1.Open the cover of the console port labeled on the bottom of the access client/access point (RU/BU) and well reserve the cover.

2.Connect the RS-232 cable to this console port.

3.Please record the LEVEL reading of your AK-100, and fasten the antenna to a position so that you can reach a max LEVEL reading. After that, call the installer on RU site to adjust the antenna in the same way. After the RU site installer has completed the procedures, the installer on BU site should fine tune the antenna position again and check that if the LEVEL reading is the max value or not? If not the max reading (compare to previous value), the previous position that you get higher LEVEL reading should be the desired position.

4.Follow the same procedure to adjust the vertical angle of your antenna to get the maximum reading in the LEVEL display

5.Repeat step 3 and step 4 until achieving the best reading index, then remove the antenna alignment kit.

Note: The AK-100 will beep more rapidly while getting better link quality. It beeps continuously after

the best link quality is achieved.

6.Put the console port cover back to the console port.

Note: The signal strength should be well aligned on both the Access client (RU) and Access point (BU).

5.7.Indoor Interface Unit

The front panel LEDs of indoor interface unit and functionality are listed below:

Function	Naming	Color	Description
Power	PWR	Green	ON: The RU power is properly applied to the indoor unit
			OFF: The power is disconnected or the fuse is blown
System	SYS	Green	ON and Green: The link to the outdoor unit is established
		or Red	ON and RED: A serious fault of A-6000 is detected
RSSI L, M,	RSSI (L,	Green	ON: The receive signal strength link to remote A-6000 is
H	M ,H)		established OFF: The RF propagation path to remote A-6000 is
			not ready Note: L is ON: the signal strength is Low L, M are
			ON: the signal strength is Medium L, M, H are all ON: the
			signal strength is High

			20

A-6000 specifications

ZyXEL Communications A-6000 is a cutting-edge networking device that has been designed to meet the demanding needs of today's digital lifestyle. This versatile and powerful device serves as a gateway for seamless connectivity, providing an efficient solution for both home and small office environments.

One of the standout features of the A-6000 is its dual-band Wi-Fi technology. Supporting both 2.4 GHz and 5 GHz bands, the device ensures optimal performance and flexibility for various applications. While the 2.4 GHz band offers extended range, the 5 GHz band provides faster speeds, which is particularly beneficial for high-bandwidth activities such as online gaming, video streaming, and large file downloads. This dual-band capability allows users to easily manage multiple devices without compromising overall network performance.

The A-6000 is equipped with advanced security protocols to safeguard user data. With built-in WPA3 encryption, the device enhances protection against unauthorized access while ensuring that sensitive information remains secure. Additionally, the A-6000 features customizable firewall settings, intrusion detection, and more, enabling businesses and individuals to maintain secure networks tailored to their unique requirements.

Another remarkable technology integrated into the A-6000 is MU-MIMO (Multi-User, Multiple Input, Multiple Output). This allows the device to communicate with multiple devices simultaneously, significantly improving network efficiency and reducing latency. As more devices connect to the network, MU-MIMO ensures that data is transmitted smoothly, providing a seamless experience for all users.

The A-6000 is designed with user-friendly management in mind. Its intuitive web interface simplifies network configuration, enabling users to set up and manage their networks effortlessly. Furthermore, the device supports mobile app management, allowing for remote monitoring and control of the network from anywhere at any time.

Another key characteristic of the ZyXEL A-6000 is its robust build quality and compact design. It not only maximizes performance but also minimizes interference, making it an ideal choice for various environments. With support for advanced technologies such as beamforming, the A-6000 enhances signal strength, providing better coverage to hard-to-reach areas.

Overall, ZyXEL Communications A-6000 stands out as a reliable and high-performance networking solution. With its combination of dual-band technology, enhanced security features, MU-MIMO support, and user-friendly management options, it is well-suited for those seeking robust connectivity in a continuously evolving digital landscape. Whether for personal use or small business applications, the A-6000 is a comprehensive device that meets modern connectivity demands with ease.

SYS

RSSI (L,

A-6000 specifications