Fiber Optic Interface
Multimode ports are labeled MM. Singlemode ports are labeled SM. Extended distance ports are labeled LH (Long Haul) or ELH (Extended Long Haul). Each fiber port provides an SC or LC connector. For informa- tion about the cable lengths supported by each model, refer to the table in the Technical Specifications section.
When making connections, be sure that the transmit (TX) optical conductor of the “twister” connects to the receive (RX) optical conductor of the connected device; and be sure that the transmit (TX) optical conductor of the device connects to the receive (RX) optical conductor of the “twister”.
Once power is applied to the unit, correct connectivity can be verified via the LINK LED.
BWDM Interface
The bidirectional wavelength division multiplexed (BWDM) port provides one singlemode SC connector that supports a maximum segment length of 20km. BWDM units must always be used in complementary pairs. That is, a
|
|
|
|
|
| up to 20 km |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metrobility | Metrobility | ||||||||||
5Apply Power
Power is applied to the “twister” from the desktop power supply. The power supply is equipped with an S760
Connect the DC input jack located on the back of the “twister” before connecting to the AC outlet.