Windows Vista

User Manual

English

Installing the device driver enables your computer’s operating system to recognize the adapter once it’s connected. Please check your operating system and refer to the appropriate installation procedure to begin installing the device driver.

Please make sure the USB VGA Adapter is unplugged from your PC or Notebook before executing the setup program. This section illustrates the simple device driver installation procedure for computer running Windows Vista operating system.

Step 1

Insert the Driver CD into the CD-ROM drive; the setup program should be launched automatically. If setup program does not begin automatically, click Start, Run and double click “D:\Setup.exe” (where D: is the path of your CD-ROM drive).

Step 2

Driver Installation Wizard, click “Next” to continue.

Step 3

License Agreement; please review it and check “I accept the terms of the license agreement.” Click “Next” to accept the License Agreement.

Step 4

Windows Security warning dialogue box under Windows Vista, it will not affect the device driver installation and usage the device. Please select “Always trust

software from “Magic Control Technology Corp.”, then click “Install” to continue.