Connecting the VM-92 9x 1:2 Video Distributor
M d | o7QC Q BRC | e |
This section describes how to connect the pf7IA as a 9 x 1:2 Composite Video distributor1.
To connect the pf7IA, as the example in Figure 9 shows2, do the following3:
1.Connect CHAN. 1 as follows:
Connect a composite video source (for example, a composite video player
1)to the CHAN. 1 IN BNC connector
Connect the CHAN. 1 OUT BNC connectors4 OUT 1 to acceptor 1A (for example, composite video recorder 1A), and the OUT 2 to acceptor 1B (for example, composite video recorder 1B)
Connect a local display to the CHAN. 1 LOOP BNC connector (if required)
2.Connect CHAN. 9 as follows:
Connect a composite video source (for example, a composite video player
9)to the CHAN. 9 IN BNC connector
Connect the CHAN. 9 OUT BNC connectors4 OUT 1 to acceptor 9A (for example, composite video recorder 9A), and the OUT 2 to acceptor 9B (for example, composite video recorder 9B)
Connect a local display to the CHAN. 9 LOOP BNC connector (if required)
3.Connect the power cord to the mains electricity.
1 Also see the configuration illustrated in Figure 3
2 Only channels 1 and 9 are illustrated in Figure 9, but you can connect each channel in a similar way
3 Switch OFF the power on each device before connecting it to your
4 As required. Not all outputs need to be connected
10 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |