English Manual
2.Quick Start
1)Connect projector VGA cable to WPS box VGA connector and turn on projector power.
2)Turn on WPS box.
♦When Projector shows the default menu on the screen as below, it indicates the WPS box is ready now.
3)Make sure your PC WLAN is enabled already, and connect your PC with WPS box.
4)Open your browser and it will redirect to WPS main page automatically, or you can enter the IP address to access the WPS web home page.
♦The default IP address of WPS is 192.168.100.10 or refers to the IP address shown on the left corner of projector screen.
6