Operation
Auto Scan Mode
1.Invoke Hotkey Mode (See page
2.Press and release the [A] key
Once scanning begins, it continues until you press the [Esc] or [Spacebar] to exit.
NOTE: While Auto Scan mode is in effect, ordinary keyboard and mouse functions are suspended.
Alternate Hotkey Invocation Keys
In case the default Hotkey Mode invocation keys (Num Lock and Minus)
are not optimal in your setup, you may change them to Ctrl and F12, respectively.
To switch the Hotkey Invocation Keys, do the following:
1.Invoke Hotkey Mode (See Page
2.Press and release H
3.This will change the Hotkey Invocation key to Ctrl and F12 (instead of Num Lock and Minus).
NOTE: This procedure is a toggle between the two methods. To revert back to the original HSM invocation keys, repeat the above procedure.
16