KTI Networks KS-108F manual Making Network Connections, Switched Ports, Making UTP Connections

3. Making Network Connections

3.1 Switched Ports

The following figure shows the locations of the switched ports:

3.2 Making UTP Connections

10/100 TP Port Configuration

All 10/100 TP ports support configuration as follows:

Auto-negotiation capable

Highest capability : 100M Full duplex

Speed : auto-sensing for 100Mbps or 10Mbps

Duplex : Full duplex, Half duplex

Auto MDI-X function

The following table lists the configuration used for the 10/100 port when it connects to different devices:

Connected Device10BASE-T hub port 100BASE-TX hub port Auto-negotiation port Non-auto*1half-duplex port Non-autofull-duplex port

Configuration Used 10Mbps, half-duplex 100Mbps, half-duplex

Determined via auto-negotiation process auto-speed-sensing *2, half-duplex Not supported

*1 Non-auto : non-auto-negotiation

*2 speed is determined by auto-sensing function

-11-