Advanced Settings

The advanced settings of WiCenter allow you to make changes related to the Channel that data is being transmitted on, as well as the rate at which data is sent. The following shows the Advanced Settings tab which can be accessed by clicking on Settings Wireless USB Settings, and then selecting the Advanced tab on the window that appears. The following shows the default and recommended settings.

NOTE: Do not change the PHY Rate setting. Leave this on the recommended and default setting. The Speed (PHY Rate) will be automatically set by WiCenter in order to achieve the best range and throughput performance.

The default settings are appropriate for most all situations. Only change channel settings if you have significantly reduced throughput due to congested air space.