The Firmware Upgrade Mode
Firmware Upgrade Mode
To set the KVM to Firmware Upgrade Mode:
1.Invoke your HSM.
2.Key in: upgrade
3.Press [Enter].
The front panel LEDs flash to indicate Firmware Upgrade Mode is in effect. To exit Firmware Upgrade Mode, you must power off the switch. See The Firmware Upgrade Utility for details
Keyboard Operating Platform
The KVM’s default port configuration is for a PC compatible keyboard. If you are using a PC compatible keyboard and you have a Mac or Sun attached to a port, you can change the port’s keyboard operating platform configuration to emulate a Mac or Sun keyboard.
26