Configuration Program Controls
Note: The texts before “Wireless Settings” in the caption bar of the dialog box are the profile name of the current connection. Thus, the caption contexts vary according to the connectivity at the given time. From the left picture, the associated profile is named “Default”. For more information about profiles, please refer to the “The Configuration Tab”
section in the manual.
Applicable. However, if you are already in the disabled radio mode, you will find the Enable Radio button here instead. Click Enable Radio to regain the link then.
From the window, the general information on the status of currently connected entry is presented. You may want to click the Rescan button to reinitiate the scanning process and update the status. Later the result of scanning will be renewed and displayed in the window. If you wish to stop the networking connection, click the Disable Radio button to stop scanning. Meanwhile, the State tab will indicate that the radio has been stopped and the remaining areas under this tab display either a zero or Not
State:
Here displays the MAC Address of the current associated entry, which could be a connected access point in the Infrastructure mode or computers joining in the
27