User manual | 15” & 17” LCD Terminals |
Features
•The LINDY LCD Terminal is designed for use in standard 60cm to 120cm depth, 19” cabinets. It requires a mounting depth of at least 50cm and a distance between front and rear 19” rails of at least 43cm.
•The complete drawer can be fully slid in and out of the rack.
•It also offers the option to pull out the LCD tray only and flip it up so that the screen can be viewed while the keyboard is hidden, and the cabinet doors are closed and locked.
•15” 1024 x 768 Active Matrix TFT LCD Screen with support for VGA, SVGA and XGA OR
•17” 1280 x 1024 Active Matrix TFT LCD Screen with support for VGA, SVGA, XGA and SXGA. Also supports SUN resolution of 1152x900
•
•Backlight lifetime of 50,000 hours
•PS/2 touch pad
•PS/2 keyboard and separate numeric keypad
•
•Dimensions: 450/485 x 460 x44mm (WxDxH)
•Weight approx. 15kg, 17kg with packaging
•Environmental Specification – For indoor use only :
o Temperature: 5 ~ 40° C (Operating) 1~50° C (Storage)
o Relative Humidity: 10~90%,
KVM LCD Terminal Installation and Use
Installing the drawer into a 19” cabinet
Important note: Because the complete drawer provides the option to slide the LCD screen out of the rack, allowing it to be flipped up, you have to make sure that the rear brackets:
1)can be slid over a distance up to 14cm
2)do not come apart from each other
when slid out 14cm | Distance between |
| 19“ rails |
Please measure the distance between front and rear 19” rails of your cabinet and select the appropriate rear brackets.
3