Lindy RS-422/485 Please click Start Control Panel Add or Remove Programs, Windows NT4.0, Linux

Page 15

(9)To uninstall the driver:

Please click Start > Control Panel > Add or Remove

Programs

Click “Change/Remove” to uninstall the I/O driver.

7.2 Windows 2000 / XP / 2003 on a 64-bit system:

On booting up, Windows 2000 / XP / 2003 will detect the presence of the PCI Serial card and will prompt for driver installation. Insert the driver CD in your CD/DVD ROM drive and point to the directory:

:\PCI IO\win2k and xp_64bit\

(Now follow the Windows 2000 / XP / 2003 installation procedure. Section 7.1)

7.3 Windows NT4.0:

On booting up, Windows NT4.0 will detect the presence of the PCI Serial card and will prompt for driver installation. Insert the driver CD in your CD/DVD ROM drive and run the setup file:

:\PCI IO\winNT\setup.exe

(Now follow the Windows 2000 / XP / 2003 installation procedure. Section 7.1)

7.4 Linux:

Please read the detailed files about the Linux OS RedHat system installation procedure on the CD ROM :

Kernal: 2.2.x :\PCI IO\Linux\RedHat V6.0.pdf

Kernal: 2.4.18 :\PCI IO\Linux\RedHat V8.0.pdf

Kernal: 2.4.20 :\PCI IO\Linux\RedHat V9.0.pdf

- 13 -

Image 15
Contents RS-422/485 PCI Card Page ‹ 2.0 Packing List ‹ 1.0 Introduction‹ 3.0 Features Communication ‹ 4.0 SpecificationsFunction HardwareRegulatory Approvals Dimensions‹ 5.0 Operating Environment Driver support‹ 6.0 Pin Assignments & Cable Wiring TxD TxD+Data+ RxD TxD TxD+ RxD+RTS+ CTS+ GND Page Jumper Settings Driver Installation \PCI IO\win2k and xp\setup.exeWindows 2000 / XP Page Page Linux Please click Start Control Panel Add or Remove ProgramsWindows 2000 / XP / 2003 on a 64-bit system Windows NT4.0Dos Windows 95 / 98SE / ME\PCI IO\win9x\ \PCI IO\win9x\ Verifying Serial PCI card installation Control Panel System Hardware Device Manager PortsCOM&LPT Click Port Settings ‹ 8.0 Configure COM portPage