Lindy 70548 user manual

Page 9

4.6. Update new RAID driver on Windows 2000/XP with existing

old driver

1.Right click on 'My Computer' and select 'Properties'. Under the 'System Properties' section, click on 'Hardware' tab, and then on 'Device Manager' click 'SCSI and RAID Controller' and right click 'Silicon Image Ultra-133 Medley ATA Raid Controller'.

2. Click 'Driver' ,'Update Driver' and select 'Search for a suitable driver for my device[Recommended]'. Insert the Driver CD in your CD-ROM/DVD drive. Click 'Next' and complete the driver installation.

3.System will go through the enumeration process and install the driver. At the end of the process, click 'Yes' to reboot your system when necessary.

4.See instructions in section 4.4 to verify controller was installed correctly.

- 9 -

Image 9
Contents Lindy No External Lindy No Internal RAID Sata II 3Gbps 4 Ports PCI-X HostIntroduction FeaturesPCI Interface High Speed Serial ATA InterfacePackage Contents What Is RAIDIndividual features for different HBA Models RAID Redundant Array of Independent DisksCreating Striped Sets RAID Bios Installation RAID SettingDisk Striping RAID Disk Mirroring RAIDCreating a Mirrored-Striped Set Creating Mirrored Sets RAIDDeleting RAID Sets Rebuilding Mirrored SetsSoftware Installation Windows NT 4.0 and Windows 2000/XP Fresh InstallationResolving Conflict Adding the HBA to an existing Windows 2000/XP Installation Adding the HBA to an existing Windows NT InstallationFor Windows 2000/XP Verifying HBA installation under Windows NT, 2000 and XP