Hinweis & Treiberinstallation Deutsch, FCC Warning

OPERATION(ENGLISH)

Caution: During an active data transfer the connection to the

computer must not be unplugged!

Failure to comply may cause the loss of data! Only one Interface can be used at one time!

Driver Installation USB and FireWire

Modern operating systems like Windows XP already include the necessary drivers provided your USB 2.0 Card is installed correctly and drivers are up to date. If the external Drive is recognized correctly as a USB 2.0 device please do not install drivers again.

For other operating systems please plug in the External Drive Box and follow the instructions.

Please also refer to the enclosed Software Installation Manual and Installation CD of the chipset supplier.

Hinweis & Treiberinstallation (DEUTSCH)

Beachten Sie bitte, dass während eines aktiven Datentransfers die Verbindung zum Rechner nicht getrennt werden darf!

Bei Nichtbeachtung droht Datenverlust!

Es darf immer nur eine der externen

Schnittstellen gleichzeitig betrieben werden!

Moderne Betriebssysteme wie Windows XP (mit installierter USB 2.0 Karte und aktuellen Treibern) haben bereits alle notwendigen Treiber an Board. Sollte das externe Laufwerk hier bereits als USB 2.0 Device erkannt werden und funktionieren, so sollte keine erneute Treiberinstallation vorgenommen werden.

Für andere Betriebssysteme: Schließen Sie das Laufwerks- gehäuse an und folgen Sie den Bildschirmanweisungen. Orientieren Si sich gegebenenfalls am beiliegenden Software Installation Manual des Chipsatzherstellers sowie der Installations-CD.

Installation du pilote

(FRANCAIS)

Il est vivement recommandé de ne pas déconnecter le périphérique USB lorsqu’il effectue un transfert !

Cela peut causer une perte de données!

Seulement une seule interface peut être utilisée à

la fois!

Les systèmes d’exploitation actuels comme Windows XP incluent directement le pilote USB 2.0 et il sera mis à jour automatiquement. Si le disque dur externe est reconnu correctement en tant que périphérique USB 2.0 n’essayez pas de réinstaller le pilote.

Pour les autres systèmes d’exploitation, connectez le boîtier externe et suivez les instructions.

Veuillez également vous référer au manuel fourni pour l’installation des pilotes sous différents systèmes.

INSTALLAZIONE(Italiano)

ATTENZIONE: durante il trasferimento dei dati non scollegate l’ Astuccio Esterno dal PC.

Ciò potrebbe causare perdite di dati e malfunzionamenti!

N.B. : Non è possibile utilizzare entrambe le

interfacce (USB 2.0 e Firewire)

contemporaneamente!

Installazione dei driver USB e FireWire

I moderni sistemi operativi come Windows XP includono già tutti i driver necessari al funzionamento dell’astuccio esterno: se, dopo averlo collegato, il Box Esterno viene riconosciuto e funziona correttamente non installate alcun altro driver.

Per gli altri sistemi operativi collegate l’Astuccio Esterno e seguite le istruzioni che compaiono a video. Fate anche riferimento al manuale di installazione del software e al CD di installazione fornito dal produttore del chipset.

Radio Frequency Energy, Certifications

European EMC Directive CE statement

This equipment complies with the requirement for CE mentioned in the European Directive and Standards EN55022 and EN55024.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Consult the dealer or an experienced technician for help

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Canadian Department of Communications RFI statement This equipment does not exceed the class B limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le règlement sur le brouillage radioélectriques publié par le ministère des Communications du Canada

LINDY No.	42926,	For Home and Office Use
		Tested to Comply with FCC Standards

42924, 20698, 42913

42926 specifications

Lindy 42926 is a versatile and feature-rich product designed to provide high-quality performance for a variety of applications. Aimed primarily at professionals and enthusiasts in the audio-visual field, this innovative device integrates advanced technologies that cater to both simplicity and functionality.

One of the main features of the Lindy 42926 is its ability to support various resolutions, including 4K and Full HD. This capability ensures that users can enjoy sharp, clear images and seamless video playback, making it ideal for presentations, events, and home theater setups. The device is designed to handle video signals up to 3840x2160 at 60Hz, which makes it a top choice for users who demand high-performance output.

In terms of connectivity, the Lindy 42926 offers multiple input and output options, including HDMI and DisplayPort. This range of ports facilitates easy integration with various devices such as laptops, projectors, monitors, and gaming consoles. With its plug-and-play functionality, users can quickly connect their devices without the need for complex setup processes, ensuring a user-friendly experience.

Another standout characteristic of the Lindy 42926 is its robust build quality. Constructed from durable materials, it is designed to withstand the rigors of daily use, whether in a professional setting or at home. The compact design also makes it easy to transport, appealing to users who are frequently on the go.

The Lindy 42926 incorporates cutting-edge technologies such as signal amplification and equalization, which help to maintain optimal signal integrity over longer distances. This is particularly beneficial in environments where cables may need to run considerable lengths, such as in large conference rooms or auditoriums.

Furthermore, the device is equipped with advanced audio features that support multi-channel audio formats, ensuring that users also enjoy an exceptional sound experience along with high-quality visuals.

Overall, the Lindy 42926 stands out with its combination of high-performance video output, versatile connectivity options, solid build quality, and user-centric design. This makes it a highly sought-after solution for anyone seeking to enhance their audio-visual experience, whether for professional use or personal enjoyment.