Windows ME Driver Installation, Browse | Lindy 70541, 70542 specification

CD-ROM/DVD is E:\) and click Browse.

8.Points specify a location, example E:\SATA Raid_4Port\Sil3114\Win98_me _2000_xp_nt4.0, click OK and then Next.

9.Click Next and then Finish.

10.Remove the Driver CD and click Yes to restart Windows to complete driver installation.

For Existing Windows 98/98 SE Systems

1.After the SATA RAID PCI Host Adapter and attached drives are configured, boot up Windows.

2.At the Add New Hardware Wizard, click Next.

3.Select Search for the best driver for your device option and then click Next.

4.Insert the Driver CD, check Specify a location, uncheck the other boxes, and click

5.Points specify a location, example E:\SATA Raid_4Port\Sil3114\Win98_me _2000_xp_nt4.0, click OK and then Next.(If your CD-ROM/DVD is E:\)

6. Click Next and then Finish respectively.

1.After the SATA RAID PCI Host Adapter and attached drives are configured, follow Microsoft procedures to install Windows accordingly.

2.Once Windows has been installed, right click My Computer, then click Properties. Click

Device Manager tab.

3.Double click Other Devices then PCI RAID Controller.

4.Click Driver tab, then Update Driver.

5.Insert the Driver CD, check Specify the location of the driver (Advanced) and click Next.

6.Select Search for the better driver option, check Specify a location, uncheck

Removable Media, type in E:\ (If your CD-ROM/DVD is E:\), and click Browse.

7.Points specify a location, example E:\SATA Raid_4Port\Sil3114\Win98_me _2000_xp_nt4.0, click OK and then Next.

8.Click Next and then Finish.

9.Remove the Driver diskette and click Yes to restart Windows to complete driver installation.

1.After the SATA RAID PCI Host Adapter and attached drives are configured, boot up Windows.

-7 -