u
Description
The 70582 32Bit PCI bus Plug & Play 1P I/O card is equipped with one ECP/EPP/SPP/BPP IEEE 1284 CENTRONICS Parallel Interface. It includes one 25 pin female connector for peripherals’ units with IEEE 1284 CENTRONICS Parallel Interface.
Hardware Specification
Parallel Port:
Parallel Chipset: SUN1888, Hardware FIFO are 32Byte FIFO
Compatible chips: with ACC3203,
IEEE standard: ECP/EPP/SPP/BPP
Max. Speed: Up to 2MB/Sec
u
Hardware Installation
Turn off the power of your computer
Plug the 70582 Parallel Adapter into the PCI bus of your computer Connect the peripheral 
Printer, Modem, Scanner… etc. 
to this adapter
Turn on the power of your computer
PCI device listing display (for example… )
Bus No Device No | Func No | Vendor ID | Device ID | Device Class |
| IRQ | |
0 | 7 | 1 | 8086 | 7010 | IDE Controller |
| 14 |
0 | 13 | 0 | 1409 | 7268 | Simple COMM. | 10 | |
|
|
|
|
| Controller |
|
|
When Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error occurs, please change the PCI slot.
After correct hardware installation you can start installing the software from the driver CD. !
PAGE 2