Lindy 21515, 21510 Display Controls, Function, Screen Adjustment Operation Procedure, Main Menu

User Manual KVM Terminal LCD

2-3 The Display Controls

Display Controls

SWITCH NO.	FUNCTION
1	RESET
2	AUTO CONFIG
3	MENU
4	ADJUST (+)
5	ADJUST (-)

1Reset: Hardware Reset

2Auto: Auto adjusts the image.

3Menu: Enter the OSD adjust menu and select the menu.

4Adjust (+): To scroll up in menu or to increase value of selected item.

5Adjust (-): To scroll down in menu or to decrease value of selected item.

2-4 Screen Adjustment Operation Procedure

1. Entering the screen adjustment

Push the 3 button once to display the main menu of the screen adjustment.

2. Entering the settings

Use the Adjust (+) and Adjust (-) buttons to select the desired setting icon and push the

3button to enter sub-menu.

3.Change the settings

After the sub-menu appears, use the Adjust (+) and Adjust (-) buttons to change the setting values.

4. Save

After finishing the adjustment, select exit icon button to exit and set save "yes", and

then push 3 to save.

5. Return & Exit the main menu

To go back to the previous menu or exit the screen adjustment, push the 3 button and select exit icon to exit the main menu.

User Manual KVM Terminal LCD

2-5 Main Menu

The OSD main menu is displayed on screen when 3 key is pressed. The OSD menu is a combination of graphic and text display. The bottom line of the main menu shows the current selected or active menu item.

The adjust (+) and adjust (-) keys are used to scroll through items within the menu. The selected item is highlighted as the scrolling move along. The 3 key is used to close the sub-menu.

	H Position	Adjust the horizontal image position
	V Position	Adjust the vertical image position
	Clock	Adjust the pixel clock
	Phase	Adjust the pixel phase
	Auto Comfit	Auto comfit the clock phase and position
	EXPAND	Expand the image
	INPUT SELECT	Select the input signal source
	INFORMATION	Check the Input information
	RECALL	Recall EEPROM default
	CLEAR EEPROM	Set to the factory default
CLR

7 8