Kenwood KB-IR1 instruction manual Enter the Disc Name, Insert a CD in the empty slot. Make sure

NAMING DISCS AND TRACKS

Discs can be given names (up to 25 characters). On the CD-3280M, CD-3260M, CD-2280M and CD-2260M, up to 20 tracks per disc can also be named (up to 15 characters each).

Although the most convenient time to enter disc and track names is when you insert the discs into the player for the first time, (that way the player keeps track of the disc names for you as you insert the discs), you can use this procedure to enter or change disc and track names any time you want.

These instructions explain how to enter disc names when you insert the discs into the player for the first time.

A. Open the loading door and leave it open for this entire operation

B. Select an empty disc slot

1. Press the DISK SEL.

key.

2. Use the number

keys to enter the

disc number.

3. Press the SET key.

4. The disc tray will

spin around until

the disc slot you’ve selected is

in the open loading doorway.

D. Enter the Disc Name

1: Press the MODE key.	2: Press the SET
The display flashes:	D--- T--
TITLE INPUT	disc number
	DXXX

IMPORTANT NOTES A

For other ways to select a disc slot, refer to the changer’s instruction manual.

C. Insert a CD in the empty slot. Make sure

the label faces towards your right.

All models:

•Instead of the SHIFT key, use

the CHARACTER/P.MODE key to

shift between capital letters, lowercase letters and num- bers/symbols.

•Use the SHIFT key to select the secondary symbols on the number and symbol keys.

•Use the enter sp

•If you m

the CURS

keys to h

rect cha

DELETE k