Linksys HM-BT-VIN user manual Reduced Wiring Feature, Initial PC Setup/ Bluetooth Modem Discovery

Page 3

ProComSol, Ltd

HM-BT-VIN User Manual

Reduced Wiring Feature

Terminals J1-5 and J1-6 can be used to reduce wiring to make installation easier. Internally, J1-5 is connected to J1-3, and J1-6 is connected to J1-4. This can reduce wiring in two ways. See Figures 3 and 4.

Figure 3. Reduced HART Wiring

Figure 4. Loop Resistor in HM-BT-VIN

The loop resistor in Figure 4 must be supplied by the user.

Initial PC Setup/ Bluetooth Modem Discovery

The following procedure must be done at least once for the PC to “Discover” the HM- BT-VIN.

1.Apply power to the HM-BT-VIN. It does not need to be connected to the HART network.

2.Run the Bluetooth driver software that came with your PC or Bluetooth adapter (ie Linksys). There is typically a Bluetooth icon on the system tray that can be double clicked.

MAN-1006 4/07/2006

Page 3

Image 3
Contents Introduction System DiagramBluetooth Range Software Drivers PowerHart Connections Reset SwitchPower LED Bluetooth Activity LEDInitial PC Setup/ Bluetooth Modem Discovery Reduced Wiring FeatureInitial Pocket PC/Bluetooth Modem Discovery PC ApplicationsMultiple HM-BT-VIN Modems Pocket PC Applications PC Test SoftwarePocket PC Test Software Will not communicate with Cornerstone TroubleshootingWill not communicate Communications unreliableContact Information WarrantyAppendix I. Front Panel Connector Diagram