Agilent Technologies E1438 manual To use the Resource Manager

Page 21

Getting Started with the Agilent E1438

To use the Resource Manager

TousetheResourceManager

 

The Resource Manager is a program from your hardware interface manufacturer. It looks at the

 

VXI mainframe to determine what modules are installed. You need to run it every time you power

 

up. If you get the message: "VISUCCESS_DEVICE_NPRESENT" then run

 

Manager.

 

Before running the Agilent E1438 software make sure that your hardware is configured correctly

 

and that the Resource Manager runs successfully. Before using your measurement system, you

 

must set up all of its devices, including setting their addresses and local bus locations. No two

 

devices can have the same address. Usually addresses 0 and 1 are taken by the

 

and are not available.

 

For more information about the Resource Manager, see the documentation with your hardware

 

interface.

 

Most Resource Managers will recognize the manufacturer and model number of the

Note

Agilent E1438 but if your interface requires that you enter this information manually, use the

following:

Manufacturer number: 4095 (Hex FFF)

Model number: 622 (Hex 26E)

21

Image 21
Contents Agilent Technologies E1438 Trademarks Agilent Technologies E1438 at a Glance Software What You Get With the Agilent Technologies E1438Other Documentation This BookPage Replacing Assemblies Contents Installing the Agilent E1438 Installing the Agilent E1438 To install the Agilent E1438 ToinstalltheLogicalAgilentEAddress14380 VXI Mainframe Nitrogen gas or compressed dust remover can also be used To transport the module To store the moduleTotransportthemodule Getting Started with the Agilent E1438 Getting Started with the Agilent E1438 System Requirements Microsoft Windows System RequirementsUpdating firmware To use the Resource Manager Programs \ Vxipnp \ age1438 Getting Started with the Agilent E1438 ACVolts32.exe Multchan32.exe Tousetheexampleprograms Replacing Assemblies Replacing Assemblies Code Numbers AssembliesReplaceableparts Replacing Assemblies ToReplaceableremovepartsthe top cover To remove the M1, M2 assemblies Replaceableparts Index Page Need Assistance? About this edition