Installing the Driver Software | Elo TouchSystems ET1225L-7SWC-1

20Installing the Driver Software

Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems:

Windows 2000

Windows 98

Windows 95

Windows NT 4.0

Windows 3.x

MS-DOS 2.x or later

Additional drivers and driver information for other operating sys- tems (including OS/2, Macintosh and Linux) are available on the Elo TouchSystems web site at www.elotouch.com.

Your Elo touchmonitor is plug-and-play compliant. Information on the video capabilities of your touchmonitor is sent to your video display adapter when Windows starts. If Windows de- tects your touchmonitor, follow the instructions on the screen to install a generic plug-and-play monitor.

Installing the Touch Driver for Windows 2000, 95/98 and NT 4.0

Refer to the appropriate following section for driver installation instructions.

Note: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver.

1.Insert the Elo CD-ROM in your computer’s CD-ROM drive.

If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup pro- gram.