Problem | Suggestion (s) |
|
|
Picture not present or severely distorted.
Verify that your video display adapter settings are formatted for the correct resolution and vertical refresh rates.
Duplicated images | A problem with your graphics adapter or |
| touchmonitor. Contact your service representative. |
Touch doesn’t work. | Check to make sure the touchscreen cable is |
| securely attached at both ends. |
|
|
Monitor Warning Messages
Message | Suggestion |
|
|
Error message: OUT OF RANGE | The graphics adapter is set for a refresh rate or a |
| line frequency that is too high. Select another |
| display mode with lower frequencies as directed |
| by your video card vendor. |
Self diagnostics message: NO SIGNAL | This message indicates that the signal is missing or |
| faulty. Check that the signal cable connector is |
| properly connected and that the connection pins |
| are not bent or damaged. If the connector is loose, |
| tighten the connector screws. Check that the PC is |
| powered on. |
|
|