Elo TouchSystems 1228L, 1225L manual Installing the Touch Driver for MS-DOS and Windows

2.Follow the directions on the screen to complete the driver setup for your version of Windows.

If the AutoStart feature is not active:

1.Click Start > Run.

2.Click the Browse button to locate the touch.exe pro- gram on the CD-ROM.

3.Click Open, then OK to run touch.exe.

4.Follow the directions on the screen to complete the driver setup for your version of Windows.

21

Installing the Touch Driver for MS-DOS and Windows 3.1

You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS.

To install Windows 3.x and MS-DOS from Windows 95/98, fol- low the directions below:

1.Insert the Elo CD-ROM in your computer’s CD-ROM drive.

2.From DOS, type d:\EloDW to change to the correct di- rectory on the CD-ROM (your CD-ROM drive may be mapped to a different drive letter).

3.Type install and press Enter to start the installation.

4.Align the touchscreen.

Refer to Chapter 2 of the Elo DOS and Windows Driver Guide as necessary for additional installation information. The driver guide can be found on Elo’s web site at www.elotouch.com.