Elo TouchSystems 1229L(WWW) manual Credit Card Reader, Specifications, Theory of Operation

Specifications
Sensor	SecuGen FOR
Image Capture Speed	600ms / frame
Image Transfer Speed	500Byte / ms
Pixel Resolution	356 x 292
USB Signaling Type	Full Speed Type

Theory of Operation

The USB host initiates communication with the FDU01 using operation commands (Sensor LED On, Fingerprint Capture Start and Stop). Fingerprint data are then captured by the CMOS sensor at a total image size of 356 x 292 with 8-bit gray level. The image frame transfer speed is 500 bytes/ms. It takes about 600 milliseconds to send one frame of image data over USB protocols.

FDU01 uses the SecuGen FOR (Fingerprint Optic Reader).

Sensor Specifications

Sensor	CMOS Image Sensor
Resolution	500dpi
Verifying Time	< 1sec
Image Capture Error Rate	< 0.1%
Life Time Typically	40,000Hrs

Credit Card Reader

There is a serial credit card reader and a USB credit card reader.

The USB version is available in HID and Keyboard emulation versions. The reader reads all three stripes on a standard credit card or drivers license. A green LED provides the operator with continu- ous status of the reader operations.

Reference Standards-Conform to	International Standards Organization,American National
applicable standards	Standards Institute, California Drivers License, American
	Association of Motor Vehicle Administrators
MessageFormat	ACCII
Card Speed	3 to 50 IPS
MTBF	Electronics 125,000 hrs; Head 1,000,000 passes

1-4 Elo Entuitive Touchmonitor User Guide