Elo TouchSystems 5000 manual

Warnings and Cautions

!Warning

•Danger - Explosion hazard. Do not use in the presence of flammable anesthetics, and other flammable materials.

•To prevent fire or shock hazards, do not immerse the unit in water or expose it to rain or moisture.

•Do not use the unit with an extension cord receptacle or other outlets unless the prongs of the power cord can be fully inserted.

•RISK OF ELECTRICAL SHOCK - DO NOT OPEN. To reduce the risk of electrical shock, DO NOT remove the back of the equipment or open the enclosure. No user-serviceable parts are inside. Refer servicing to qualified field service engineers only.

•Uninsulated voltage within the unit may have sufficient magnitude to cause electrical shock. Avoid contact with any part inside the unit.

Caution

•Power cord is used as a disconnection device. To de-energize equipment, disconnect the power cord.

•This unit must follow the national requirement, and local state laws to dispose unit.

•Before connecting the cables to your Elo touchmonitor, make sure all components are powered OFF.

•The use of ACCESSORY equipment not complying with the equivalent safety requirements of this equipment may lead to a reduced safety of the resulting system. Consideration relating to the choices of accessory equipment should include:

•Use of accessory in the patient vicinity.

•Evidence that the safety certification of the accessory has been performed in accordance to the appropriate IEC 60601-1 and/or IEC 60601-1-1 harmonized national standard.

•For continued safety ­

- This unit only complies to the above standards if used with a medical grade power cord.

-A medical grade power supply, such as the one specified, is required for use in a medical application.

!Note:

•This symbol alerts the user to important information concerning the operation and maintenance of this unit, which should be read carefully to avoid problems.

• This symbol means DC Current.

• This symbol means ON/OFF stand-by switch.

iv