CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly.
| AUDIO INPUT JACKS |
| VIDEO INPUT JACKS |
AUDIO OUTPUT JACKS
Connect the
DVI - I |
RGB |
MCI / WI |
Connect the audio output | Connect the composite video | ||||
from video equipment to | output from video equipment | ||||
these jacks. |
|
|
| to Y jack or connect the | |
(Refer to P13.) |
|
|
| component video outputs to | |
● When the audio output | Y, Pb/Cb and Pr/Cr jacks. | ||||
is monaural, connect it | (Refer to P13.) | ||||
to L (mono) jack. |
|
|
| ||
AUDIO | VIDEO IN |
|
| Pr/Cr |
|
R IN L | Y Pb/Cb |
| |||
S – VIDEO IN | COMPUTER |
| AUDIO |
| |
R |
| OUT L |
| ||
| AUDIO IN |
| RESET | ||
|
|
|
| ||
|
|
|
|
| |
RGB | CONTROL PORT |
RGB INPUT 1 | COMPUTER AUDIO |
(ANALOG) TERMINAL | INPUT JACK |
Connect a computer | Connect the audio output |
output to this jack. | (stereo) from computer to |
(Refer to P12.) | this jack. (Refer to P12.) |
RGB INPUT 2 (DIGITAL/ANALOG)
Media Card Imager / Wireless Imager
TERMINAL
Connect an external audio amplifier to these jacks.
(Refer to P12, 13.)
RESET BUTTON
This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart the unit. Do not use RESET function excessively.
CONTROL PORT CONNECTOR
When controlling the computer with Remote Control Unit of this projector, connect the mouse port of your personal computer to this connector. (Refer to P12.)
USB CONNECTOR (Series B)
When controlling the computer with Remote Control Unit of this projector, connect USB port of your personal computer to this connector. (Refer to P12.)
Connect computer output (Digital / Analog
*optional accessories
✽Do not press this button. This button is used for our optional accessories.
11