Peavey 450 Volume Control, Line OUT-XLR Jack, Line OUT Level Control, PRE-/POST-EQ Select Switch

Page 7

16. VOLUME CONTROL

Controls the overall volume level of the amplifier. The final level adjustment should be made after the desired sound has been achieved.

17. LINE OUT—XLR JACK

Provides low impedance, electronically balanced signal for patching into a sound reinforcement or recording console.

18. LINE OUT LEVEL CONTROL

Controls the output level of the balanced line out.

19. PRE-/POST-EQ SELECT SWITCH

Allows selection between a Pre-EQ (switch set to the “out” position) or a Post-EQ (switch set to the “in” position) send to the XLR line out jack.

20. GROUND LIFT SWITCH

Provided to lift the ground on the XLR jack when ground loops are encountered.

21. EFFECTS SEND JACK

Output for supplying signals to external low-level effects or signal processing equipment.

22. EFFECTS RETURN JACK

Input for returning signals from external low-level effects or signal processing equipment.

23. EFFECTS LOOP REMOTE SWITCH JACK

This jack accommodates the remote footswitch (optional part number 00051000 ON/OFF single button switch), which is used to remove the effects loop from the signal path. The remote footswitch essentially acts as a bypass to punch in or punch out from your external effects.

24. DDT™ SPEAKER PROTECTION DEFEAT SWITCH

DDT™ speaker protection is defeated when the push button is in the “in” position. We recommend that DDT be enabled at all times to protect the speakers.

25. PREAMP OUT JACK

This 1/4" jack is used to route the preamp signal to external inputs, such as the input of an additional power amp. The signal is post volume control. Use of this jack does not defeat the signal to the MAX 450 amp (some volume difference may be noticed due to the impedance change experienced when adding an external unit to the signal patch).

26. POWER AMP IN JACK

This 1/4" jack is used to input an external signal to the power amp section of the MAX 450. Using this jack will disconnect any signal from the preamp section. Using this jack along with the preamp out jack creates a possible second effects loop.

27. POWER CORD RETAINERS

Use the Power Cord Retainers to wrap and store your cable while storing or transporting your MAX 450. It is best to disconnect the cord from the unit before wrapping.

28. SPEAKER OUTPUT JACKS

These two 1/4" jacks provide the powered signal from the amplifier. Each connector is electrically the same (in parallel). Use one of the jacks to connect your speaker cabinet and the other to add a second speaker cabinet in parallel. The minimum speaker load impedance is 2 Ohms (or two 4-Ohm speakers in parallel).

Warning: To prevent the amplifier from overheating, the front fan and rear-located vents should always remain clear of obstructions.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Page Sound Level dBA, Slow Response Important Safety InstructionsProfessional Bass Amplifier FeaturesGround Polarity Switch AC Power FeaturesRemovable AC Power Cord Power SwitchInput Jack POWER/STATUS LEDInput PAD Switch Bright SwitchEffects Loop Remote Switch Jack Volume ControlPRE-/POST-EQ Select Switch Ground Lift SwitchPreamplifier Section SpecificationsSystem Specifications Power Amplifier Section450 Rock Características Amplificador profesional para bajoCaracterísticas DE Poder CA Interruptor DE Brillantez LED DE Estado DE PoderConector DE Entrada Entrada DE Interruptor DE PADConector Xlrsalida DE Línea Control DE VolumenInterruptor Para Cancelación DE Protección DE Bocinas Control DE AgudosSección DE Preamplificador EspecificacionesEspecificaciones DEL Sistema Sección DE Amplificador DE PoderCaracteristiques Amplificateur BasseSelecteur DE Polarite DE LA Masse Caracteristiques D’ALIMENTATIONConnecteur IEC Interrupteur DE Mise Sous TensionSelecteur Bright LED DE Statut ET D’ALIMENTATIONEntree Attenuateur D’ENTREEControle MID Controle VolumePrise DE Pedale DE Commande DE LA Boucle D’EFFET Controle LOWSorties HP Pattes D’ENROULEMENTProtection Eigenschaften Professioneller BASS-VERSTÄRKERAnmerkung Gilt NUR FÜR Grossbritannien StromversorgungPRE Gain POWER/STATUS-LEDVolume BrightEffects Send Effects Loop Remote SwitchPower AMP Ground LiftLeistungsverstärker Schutzschaltungen Technische DatenVorverstärker Peavey Electronics Corporation Limited Warranty 80304957

450 specifications

The Peavey 450 is a versatile and powerful bass amplifier head designed for both amateur and professional musicians. Known for its exceptional sound quality and robust construction, this amplifier has found a place in various music genres, from rock to jazz. Its lightweight yet durable design offers musicians the portability they crave without sacrificing performance.

One of the standout features of the Peavey 450 is its impressive power rating. With a capability of delivering up to 450 watts at 4 ohms, it provides ample headroom for dynamic playing. This ensures that bassists can maintain clarity and punch even at higher volumes, making it an ideal choice for live performances. The amp can also operate at lower impedances for additional power, providing flexibility for players with various cabinet setups.

The tonal versatility of the Peavey 450 sets it apart from other amplifiers in its class. The amp incorporates a 5-band EQ, allowing musicians to finely tune their sound to match their style or the venue's acoustics. Additionally, it features Peavey's exclusive Psycho-Acoustic low-end enhancement circuitry, which enriches the bass response without overshadowing mid and high frequencies. This technology is especially beneficial for genres that demand a tight low-end punch, such as metal or funk.

Another highlight of the Peavey 450 is its built-in effects loop, which allows players to integrate their favorite pedals seamlessly into the signal chain without losing tone integrity. The amplifier also includes a balanced XLR output for direct connection to a mixer or recording device, making it convenient for studio work or live sound applications.

Durability is a hallmark of Peavey products, and the 450 is no exception. Housed in a rugged chassis, this amplifier is built to withstand the rigors of gigging. The high-quality components used in its construction ensure longevity, making it a reliable choice for touring musicians.

In summary, the Peavey 450 is a powerful and versatile amplifier that offers bassists a range of features to enhance their sound and performance. With its robust power, advanced EQ capabilities, and durable design, it stands out as a reliable choice for musicians looking to elevate their sound. Whether on stage or in the studio, the Peavey 450 helps bassists achieve their desired tone with ease and clarity.
Top Page Image Contents