Dukane 8793h user manual Replacing the lamp, Type number 456-8793H

Page 13
1.
2.

Replacing the lamp

A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number.

Type number : 456-8793H

Lamp cover

Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes.

Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken, also ask the

dealer to replace the lamp.

In case of replacement by yourself, follow the

 

 

following procedure.

 

3

Loosen the screw (marked by arrow) of the lamp

 

 

 

3. cover and then slide and lift the lamp cover to the

 

 

side to remove it.

 

 

Loosen the 2 screws (marked by arrow) of the

 

 

4. lamp, and slowly pick up the lamp by the handle.

5

4

Never loosen any other screws.

 

 

ENGLISH

5. Insert the new lamp, and retighten firmly the 2 screws of the lamp that are loosened in the

previous process to lock it in place.

6. While putting the interlocking parts of the lamp cover and the projector together, slide the lamp

cover back in place. Then firmly fasten the screw of the lamp cover.

7. Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu.

(1) Press the MENU button to display a menu.

(2) Point at the ADVANCED MENU in the menu using the

▼/▲ button, then press the ► button.

(3)Point at the OPTION in the left column of the menu using the ▼/▲button, then press the ► button.

(4)Point at the LAMP TIME using the ▼/▲ button, then press the ► button. A dialog will appear.

Handle

6

(5) Press the button to select “OK” on the dialog. It performs resetting the lamp time.

CAUTION ►Do not touch any inner space of the projector, while the lamp

is taken out.

NOTE • Please reset the lamp time only when you have replaced the lamp,

for a suitable indication about the lamp.

13

Image 13
Contents 8793H ContentsImportant safety instruction Entries and graphical symbols explanationFirst of all About Electro-Magnetic Interference Canada Regulatory noticesContents of package Preparing for the remote control Arrangement For details, see User’s Manual Operating Guide Connecting with your devicesOperating Guide Connecting power supply Turning on the power Adjusting the projectors elevator Displaying the picture Use the Volume + / Volume buttons to adjust the volumeTurning off the power Replacing the lamp Case of replacement by yourself, follow Following procedureType number 456-8793H High Voltage High Temperature Type number NJ27424 Cleaning and replacing the air filterCD-ROM/DVD-ROM drive Using the CD manualSpecification SpecificationsLaser remote control RC-R008 Filter set NJ27424Trademark acknowledgment Troubleshooting Warranty and after-service8793H Page
Related manuals
Manual 75 pages 47.44 Kb