MULTIFUNCTIONAL SETTINGS (continued)
OPTION Menu
With the OPTION menu, the five items shown in the Table below can be performed.
Please perform each operation in accordance with the instructions in the Table.
MENU
MAIN | VOLUME |
AUTO OFF | |
WHISPER | |
INPUT | LAMP TIME |
SCREEN | FILTER TIME |
OPTION |
|
12
: SELECT
Example : OPTION Menu
(VOLUME)
OPTION Menu
Item |
|
| Description |
| |
|
|
|
| ||
VOLUME | Adjust Volume: High | Low |
| ||
|
|
|
| ||
| Adjust AUTO OFF Time: |
|
| ||
AUTO OFF | Long (MAX. 99 min.) |
| Short (Min. 1 min.) | (DISABLE: 0 min.) | |
The system automatically enters the standby mode if no signal is received | |||||
| |||||
| within the set time. This function is inactive when DISABLE (0 min.) is selected. | ||||
|
|
|
| ||
| Select WHISPER Mode: |
|
| ||
WHISPER | NORMAL | WHISPER |
| ||
When WHISPER is selected the WHISPER mode is activated. In the WHISPER | |||||
| |||||
| mode, acoustic noise and screen brightness are reduced. |
| |||
|
| ||||
| Refer to LAMP TIME: When set, this function displays the total time the | ||||
| projector lamp has been used since new. |
| |||
Reset LAMP TIME [Use this function only when the lamp has been replaced!]:
Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the lamp with a
LAMP TIME new lamp, select RESET on the menu with the 
button.
•Do not reset the lamp time unless you have replaced the lamp. And, always reset the lamp time when replacing the lamp. The message functions will not operate properly if the lamp time is not reset correctly.
•Before replacing the lamp, carefully read the descriptions headed "THE LAMP".
Refer to FILTER TIME: This function displays the total time the
Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:
Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the filter, select
FILTER TIME RESET on the menu with the 
button.
DEFAULT
CANCEL
•Do not reset the filter time unless you have cleaned or replaced the filter. And, always reset the filter time when cleaning or replacing the filter. The message functions will not operate properly if the filter time is not reset correctly.
•Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".
6