Dukane 28A8043, 28A8753 manual Using the Projector, Basic Image Adjustment, Adjusting the Projector

Page 23

USING THE PROJECTOR

This section describes how to use and make adjustments to the projector. It also provides a reference to the keypad and remote buttons and the options available from the on-screen menus.

Basic Image Adjustment

1Make sure you have powered up your equipment in the right order (page 13).

2If the image doesn’t display completely, zoom the image (page 15), adjust the height of the projector (page 16) or center the image by adjusting its horizontal or vertical position (page 24). Be sure the projector lens is at a 90 degree angle to the screen.

3If the image is out of focus, rotate the focus ring (page 15).

4If the colors don’t look right, adjust the brightness, contrast, tint, or color (page 22).

Adjusting the Projector

To focus the image, rotate the focus ring (Figure 8) until the image is clear. To zoom the image, rotate the zoom ring. This adjusts the image size.

zoom ring

focus ring

FIGURE 8

Focus ring and zoom ring

NOTE: To obtain the best overall focus quality, open the menu and focus on the text. This will ensure that the best overall image quality is achieved.

15

Image 23
Contents Users Guide Page Safety Certifications Trademarks Table of Contents Index AppendixSafety Instructions Customer Service Introduction Image ResolutionUnpacking the Projector CompatibilityShipping box contents Rear view of projector If You Need Assistance Usage GuidelinesWarranty F t Setting UP the ProjectorT t i n g O j e c t o r Connecting a Computer T t i n g O j e c t o r Connecting a Video Player T t i n g O j e c t o r Powering up the Projector Turning Off the Projector Adjusting the Projector Using the ProjectorBasic Image Adjustment I n g O j e c t o r Using the Remote Control Using the Keypad and Remote Buttons Press the Volume buttons to adjust the volume Press this button to display a black screen Using the On-Screen Menus Basic Menu See the following pages for details on this menu Setup menu System menu Language menu Service menu Userlogo menu Cleaning the Dust Filters Maintenance & TroubleshootingCleaning the Lens I n t e n a n c e Troubleshooting Replacing the Projection Lamp Replacing the Batteries in the Remote Control Using the Security Lock Problem The projector is not running TroubleshootingProblem Image isn’t centered on the screen Problem Only the start-up screen displaysProblem Color or text not being projected Problem The screen resolution is not rightProblem Projected image is distorted Problem Image is too wide or narrow for screenProblem Image is out of focus Problem Image and menus are reversed left to rightCall Dukane Technical Support at Or Toll-Free at I n t e n a n c e Troubleshooting Appendix SpecificationsStandard Accessories ship with the projector AccessoriesFor a complete listing of Optional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using Video Mirroring with a PowerBook Computer Projected Image Size Numerics IndexD e Page D e Legal Information Audio Visual Products