Adjusting the projector's elevator
The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments.
Front foot | Rear foot |
Spacer
2.3~4.3°
Front foot | Spacer (Large) | |
|
| |
| Rear foot | Spacer (Small) |
WARNING ►Keep the spacers away from children and pets. Be careful not to let them swallow the spacers. If swallowed consult a physician immediately for emergency treatment.
NOTE • The adjustment angle can be adjusted up to plus or minus 1° each of Front and Rear foot.
•After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer. Install Large on the Front foot and Small on the Rear foot of the spacer. If change the setting place of the projector, it will recommend keep and reuse the spacers.
Operation
INPUT button
FOCUS - button 
FOCUS + button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY | FREEZE | PAGE | VOLUME |
ON | UP |
| |
OFF |
| DOWN |
|
KEYSTONE | MY BUTTON | MUTE | |
FOCUS | | ||
COMPUTER button VIDEO button
POSITIONMENU
ENTER
ESCRESET
Displaying and switching the image
Press the INPUT button on the projector. Each time you press the button, the projector switches its input port in turn. You can also use the remote control to select an input signal. Press the VIDEO button for selecting an input signal from the HDMI,
12