Canon LV-X1 owner manual TOP Controls and Indicators, SET Button

BEFORE OPERATION

TOP CONTROLS AND INDICATORS

This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.

POWER ON–OFF BUTTON

Used to turn the projector on or off. (P19)

INPUT BUTTON

Used to select input source. (P22, 30)

MENU BUTTON

Used to open or close MENU operation. (P17, 18)

KEYSTONE BUTTON

Used to correct keystone distortion. (P20, 35)

SET BUTTON

Used to execute the item selected. It is also used to expand / compress the image in

POWER

INPUT

MENU

VOL	VOL
–	+
KEY		READY
STONE		LAMP
	WARNING	REPLACE
		LAMP
SET	TEMP.

READY INDICATOR

Lights green when the projector is ready to be turned on. And it flashes green in Power Management mode. (P36)

LAMP REPLACE INDICATOR

Turns to yellow when the life of the projection lamp draws to an end. (P38)

DIGITAL ZOOM mode. (P29)

POINT (VOLUME + / – ) BUTTONS	WARNING TEMP. INDICATOR			LAMP INDICATOR
Used to select an item or adjust	Flashes	red	when	Becomes dim when the
value in ON-SCREEN MENU. They	internal	projector		projector is turned on.
are also used to pan the image in	temperature		is too	And bright when the
DIGITAL ZOOM +/– mode. (P29)	high. (P37)			projector is in stand-by
POINT LEFT/RIGHT buttons are				mode.
also used as VOLUME +/– buttons.

16