Docking Station, LED Indicators | Crestron electronic CT-1550

SMARTOUCHTM TOUCHPANELS

SmarTouchTM Touchpanel Accessories

DOCKING STATION

ST-DSNDocking Station for SmarTouchTM " Wireless Touchpanels

TM touchpanels

The ST-DSN Docking Station is a microprocessor based battery charger for Crestron SmarTouch wireless touchpanels. The docking station design facilitates fast recharging of the ST-BTPN battery pack while it is installed in the touchpanel. The ST-DSN also provides operating power to the touchpanel while the battery is recharging. LED indicators clearly show charging status.

For ultimate flexibility, the ST-DSN also supports recharging of a standalone ST-BTPN while it is not installed in a touchpanel. This makes it possible to keep one battery pack charged while another is in use.

The ST-DSN includes a PW-1215 power supply, which is ordinarily used to power the docking station but may alternately be connected directly to the DC power jack on the touchpanel itself.

SPECIFICATIONS

Connectors

Power: (1) 2.5mm barrel DC power jack

12 Volt DC power input (PW-1215 power supply included)

Enclosure

High impact black injection-molded case

Dimensions

Height: 0.935 in (2.375 cm)

Width: 6.715 in (17.056 cm)

Depth: 6.765 in (17.183 cm)

Weight

15.8 oz (0.49 kg) – not including power supply

smartouch

LED Indicators

Power (Logo): (green) Indicates 12 Volts DC from power supply

CHG: (red) Indicates battery charging status

RDY: (green) Indicates battery is fully charged

Power Requirements

Docking Station/Charger:

18 Watts (1.5 Amps) @ 12 Volts DC

Power Supply (PW-1215 included): 120 Volts AC @ 60Hz

Environmental

Temperature: 32° to 104°F (0° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

INTERNATIONAL VERSION (230 VAC)

STI-DSN

All the features and specifications of the ST-DSN except:

Power Requirements

Docking Station/Charger:

18 Watts (1.5 Amps) @ 12 Volts DC

Power Supply (PWI-1215 included): 230 Volts AC @ 50Hz

INCLUDED ACCESSORIES

PW(I)-1215

12 Volt Power Pack

174