Creative GH0220A Using Your Sound Blaster Tactic3D Rage Wireless, Setting Up for Initial Use

Using Your Sound Blaster Tactic3D Rage Wireless

Here we explain how to use the headset including the following procedures:

•Setting Up for Initial Use

•Adjusting the Volume

•Using Your Headset While Charging

•Manual Pairing

•Usage Scenarios

Setting Up for Initial Use

Step 1 : Charge it

Your headset can be used out of the box by connecting it via the charging cable to a computer. The headset will charge while it is in use. However, please note that your headset will not be fully charged if you skip the initial charging process detailed below.

Note:

You are recommended to charge your headset for at least 8 hours before it is used for the first time. Connect your headset to your computer using the Micro-USB to USB cable and keep it turned off during this initial charging process. The Power LED flashes white when charging and will turn off once charging completes.

Note:

Press and hold the Power LED button for 3 seconds to turn the headset off.

Using Your Sound Blaster Tactic3D Rage Wireless 4