Chief Manufacturing CMA-152 installation instructions Tools Required for Installation, Parts

Installation Instructions Model: CMA-152

TOOLS REQUIRED FOR INSTALLATION

•Pipe Wrench

•5/32" Security Hex Key (provided)

NOTE: Other tools may be required depending on your method of installation.

PARTS

After unpacking carton, inspect and verify contents (See Figure 1). If any listed parts are missing or damaged, contact Chief Customer Service at 1-800-582-6480.

Table 1: Parts

Item	Description	Qty
10	COUPLER, 1-1/2" NPT	1
20	SCREW, Security Set, 5/16"-18 x 5/16	2
30	KEY, Security Hex, 5/32"	1
	COLUMN, Threaded, 1-1/2" NPT (required, not	2
	supplied)

10

20

30

Figure 1: Parts

INSTALLATION

1.Screw adapter (10) onto upper 1-1/2" NPT threaded column by hand (See Figure 2).

Upper Column

10

Figure 2: Install Adapter

2.Screw lower 1-1/2" NPT threaded column into adapter (10) by hand (See Figure 3). Tighten lower column securely using pipe wrench, orienting cable management access to desired location.

20	10
Lower Column

Figure 3: Install Lower Column

3.Using key (30), install and tighten both screws (20) securely.

3