What Is
Included
AC Power
Product Overview
Set Up
Fuse
Replacement
• | Lil’ Bubbler | • | Warranty Card |
• | Fluid Tank | • | Quick Reference Guide |
This product has a
Handle (Top)
Bubble Wands
Fan (Rear
Panel)
Fuse holder (Rear Panel)
Fluid Tank Access
Dimensions: | 10.8 x 6.5 x 6.7 in (274 x 165 x 170 mm) |
Weight: | 3.7 lbs (1.65 kg) |
Place unit on a flat, level surface or use the mounting brackets provided. Ensure that the bubbles are not shooting directly in anyone’s face or above heavy traffic areas, as bubble fluid leaves a slippery surface.
The bubble machine must not have more than a 5º angle of inclination. Do not tilt the bubble machine or the fluid will spill.
1.Disconnect this product from the power outlet.
2.With a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.
3.Remove the blown fuse and replace with a good fuse of the same type and rating (F1A, 250 V).
4.Screw the fuse holder cap back into place and reconnect power.
Page 3 of 4