Dymo LM200 manual Justify Just, Vertical Text Vert, MULTI-LINE Printing, Label Length LTH, = Dymo

The "B" (BIG FONT) mode will produce highly visible labels using the entire print height on all except 6mm labels.

•To create a label in "B" mode use or to move the cursor under "B" and press (BFONT lights in display).

•In "B" mode, you can select between condensed, normal or extended, but all other options are not available.

JUSTIFY JUST

Labels are normally printed with the text left-justified. On 2-line labels, press JUST to select left-justified, right- justified or centred text, as shown in the display. See also LABEL LENGTH.

VERTICAL TEXT VERT

•Rotates the text through 90° so that the label is printed

ve r t i c a l l y , as confirmed by the VERT indicator in the display.

•Press again to cancel and return to horizontal text. Note: Vertical text is not available on 2-line labels.

MULTI-LINE PRINTING

• Press to start the next line of text on a 2-line label, e.g.

This is a two line label in the display will be

printed as:

This is a two	and the display will
line label	indicate 2 lines:	•
		•2

Labels can be created as follows:

• Use	or to move the cursor under the desired
option. Either press		to select the option (confirmed
by the	or — indicator displayed), or DEL to exit .

•When the or — indicator is displayed, press BOX/UL to cancel the Box/Underline option.

LABEL LENGTH LTH

The length is normally calculated automatically, according to the length of the text on the label.

The label length function displays the last used fixed label length, eg:

45mm 1 10

•Press DEL to exit the length function without changing the length, or:

•Use or to increase (5000mm / 196.85 inches max.) or decrease the length in 1mm / 0.4 inch

steps, or or to increase or decrease the length in 10mm / 0.4 inch steps. The minimum fixed label length is 45mm.

•Press to fix the length for all subsequent labels, confirmed by the LTH SET indicator in the display.

•Press LTH to cancel the fixed length and restore the automatic length.

•If the fixed length is too short for the text, when you

PREVIEW

press PRINT or + CAPS the display will show how

6mm

9mm

9mm

12mm

1 line small text

Up to 2 lines

small text

1 line normal text

Up to 2 lines

small text

19mm	Up to 2 lines
	small text

19mm 1 line normal text

much longer the label is than the fixed length, eg:

and it will not print. Either cancel the fixed length (see

above), or press LTH twice and use to increase

the length; the label is now long enough and can be printed.

COPIES

MULTIPLE COPIES + STYLE

12mm 1 line normal text

The line indicator in the display will confirm the number of lines in the label.

BOXED/UNDERLINED PRINTING BOX/UL

•If no Box/Underline option has been selected, pressing

BOX/UL once will display the menu below:

Underlined -	—	= DYMO
Square Box -		=
Pointed Box -		=
Round Corners -		=
ZigZag Box -		=
Shaded Box -		=

•Your LabelManager can provide multiple copies within the range 1-99.

COPIES

•To use this facility press then STYLE to show the last number of copies set on the display, for example

# = 03 . Use or to increase or decrease the number of copies required, then press to confirm (COPIES indicator lights in the display). To print the desired quantity press PRINT .

•To cancel an existing multiple copies setting, press

COPIES

+STYLE .

Note: A row of vertical dots will print between each label as a cutting guide.

INCREMENTAL NUMBERING

Labels can be printed in increments of 1 automatically.

•Key in your starting number as the right most digit on

	1,2,
	3...
the label. Press	n
	then PRINT the display will

automatically move up a digit to the next number.

5