About Your New Label Maker, Getting Started

About Your New Label Maker

With the DYMO® LabelManager® 210D electronic label maker, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in many different font sizes and styles. The label maker uses DYMO D1 tape cassettes in widths of 1/4”(6 mm), 3/8” (9 mm), or 1/2” (12 mm). These tape cassettes are available in a wide range of colors.

Visit www.dymo.com for information on obtaining labels and accessories for your label maker.

Product Registration

Visit www.dymo.com/registration to register your label maker online.

Getting Started

Follow the instructions in this section to print your first label.

Connecting the Power

The label maker is powered by standard batteries or an AC power adapter. To save power, the label maker automatically turns off after two minutes of inactivity.

Inserting the Batteries

The label maker uses six high-capacity AA alkaline batteries.

To insert the batteries

1. Slide the battery compartment cover away from the label maker. See Figure 2.

2. Insert the batteries following the polarity markings (+ and –).

3. Replace the cover.
Ç Remove the batteries if the label maker will not	Figure 2
be used for a long period of time.