Getting Started, Connecting the Power

About Your New Label Maker

With your new DYMO LabelManager® 350D label maker, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in many different sizes and styles. The label maker uses DYMO D1 label cassettes in widths of 1/4” (6 mm), 3/8” (9 mm), 1/2” (12 mm), 3/4” (19 mm), or 1” (24 mm). Label cassettes are also available in a wide range of materials.

Visit www.dymo.com for information on obtaining tapes and accessories for your label maker.

Warranty Registration

Please complete the warranty registration card and return it to the appropriate customer service address within seven days of purchase. Visit www.dymo.com for details.

Getting Started

Follow the instructions in this section to print your first label.

Connecting the Power

The label maker operates on battery power or with an optional AC power adapter. To save power, the label maker will automatically turn off after two minutes of inactivity.

Inserting the Batteries

The label maker uses six AA batteries.

To insert the batteries

1.Remove the battery compartment cover. See Figure 2.

Figure 2

2.Insert the batteries following the polarity markings (+ and –).

3.Replace the battery compartment cover.

xRemove the batteries if the label maker will not be used for a long period of time.

Connecting the Power Adapter

An optional AC power adapter can also be used to power the label maker. Connecting the power adapter to the label maker disconnects the batteries as a power source.

To connect the power adapter

1.Plug the power adapter into the power connector on the top, left side of the label maker.

2.Plug the other end of the power adapter into a power outlet.

Inserting the Tape Cassette

Your label maker comes with one D1 tape cassette. Visit www.dymo.com for information about purchasing additional tape cassettes.

To insert the tape cassette

1.Press and release the tape cassette cover to open the tape compartment. See Figure 3.