Dell 4210X manual USB port One USB slave for remote support

Page 72

 

USB port: One USB slave for remote support.

 

RS232 port: One mini-DIN 6-pins for RS232

 

communication.

 

RJ45 port: One RJ45 connector for control of

 

projector through network.

 

12V output: One 12V DC / 200mA max. relay

 

output for driving automatic screen.

Lamp

Philips 280W user-replaceable lamp (up to 2500

 

hours in eco mode)

NOTE: The lamp life rating for any projector is a measure of brightness degradation only, and is not a specification for the time it takes a lamp to fail and cease light output. Lamp life is defined as the time it takes for more than 50 percent of a lamp sample population to have brightness decrease by approximately 50 percent of the rated lumens for the specified lamp. The lamp life rating is not guaranteed in any way. The actual operating life span of a projector lamp will vary according to operating conditions and usage patterns. Usage of a projector in stressful conditions which may include dusty environments, under high temperatures, many hours per day and abrupt powering-off will most likely result in a lamp’s shortened operating life span or possible lamp failure.

72

Specifications

Image 72
Contents User’s Guide December 2008 Rev. A00 Contents Adjusting the Projected Image Troubleshooting Your Projector Package Contents Your Dell ProjectorAbout Your Projector Your Dell Projector Connecting Your Projector Connecting to a Computer Monitor Loop-Through Connection Using VGA Cables Connecting a Computer Using an RS232 cable Connecting a DVD Player Connecting a DVD Player Using a Composite Video Cable Connecting a DVD Player Using a Component Video Cable Connecting a DVD Player Using an Hdmi Cable Connecting to Local Area Network 12V DC Plug Connection With Commercial RS232 Control Box Using Your Projector Turning Your Projector OnTurning Your Projector Off Adjusting the Projected Image Raising the Projector HeightAdjusting the Projector Zoom and Focus Adjusting Projection Image Size Projector to screen distanceUsing the Control Panel On-screen display OSD is displayed Using Your Projector Using the Remote Control Presentation mode, Bright mode, Movie mode Using Your Projector Installing the Remote Control Batteries Press the tab to lift the battery compartment coverOperating Range With Remote Control Using the On-Screen Display AUTO-ADJUSTInput Select Picture in PC Mode Picture in Video Mode Display in PC Mode Using Your Projector Display in Video Mode Lamp Using Your Projector Network Information Using Your Projector Using Your Projector Using Your Projector Using Your Projector Using Your Projector Using Your Projector Configuring the Network Setting Managing the Projector From Web ManagementManaging Properties HomeNetwork Settings Projector Status and Control Using Your Projector Mail Alert Password Setting Login Firmware Update Using Your Projector Using Your Projector Tips Using Your Projector Troubleshooting Your Projector Problem Possible SolutionProblem Problem Problem Guiding Signals Amber OFFLamp failure Lamp is defective. Replace the lamp Changing the Lamp Troubleshooting Your Projector Specifications Specifications26286mm USB port One USB slave for remote support Command types RS232 Pin Assignment RS232 ProtocolResolution Compatibility Modes Analog/DigitalContacting Dell Visit support.dell.comAppendix Glossary GlossaryGlossary Glossary Index Hdmi Index