Delta Electronics DNL SIP Series For DNM04xx and DNL04xx series, Vtrim = 0.7 − 0.1698 ⋅ Vout

Page 9

Table 2.

Vo,set

Rset (k Ω ) R33

Recommend Value, R//R

0.7525

Open

Open

1.2

22.464

23.7k//432k

1.5

13.047

14.0k//191k

1.8

9.024

9.53k//169k

2.5

5.009

5.23k//118k

3.3

3.122

3.16k//261k

5.0

1.472

1.5k//78.7k

Test

1.Put the resistor to program the desired output voltage set point by follow Table 1 and Table 2 for the standard output.

2.Set the input voltage to the desired operating level while monitoring DVM2.

3.Turn on the fan.

4.Set the enable switch SW2 to the “ON” position to enable the converter.

5.Adjust the output load across the converter’s operating load range.

6.Note the output voltage over the full range of the operating load range (please refer to the data sheet for the detailed specification).

(2)Output Voltage Set-Point Adjustment by external voltage source

For DNM and DNL series, trim to Vo,set using an external voltage source, connect it between the TRIM pin and GND pin. Please refer to the Table 3 and Table 4 as below for the appropriate Vout. The value of Vtrim is specified as follows:

For DNM04xx and DNL04xx series

Vtrim = 0.7 − 0.1698 ⋅ (Vout − 0.7525)

For example, to program the output voltage of a DNL04 module to 3.3 Vdc, Vtrim is

calculated as follows:

 

 

 

Vtrim = 0.7 − 0.1698 ⋅ (3.3 − 0.7525) = 0.267V

 

 

Table 3. : Vo,set adjustment range using external voltage source.

 

 

Normal

 

 

 

Product Part

Output Set

Vrim (V)

 

 

Voltage

 

 

 

 

 

 

 

(Vdc)

 

 

 

 

0.7525

Open

 

 

DNM04S0A0R10P A/B/C

1.2

0.6240

 

 

DNM04S0A0R10N A/B/C

 

 

 

 

1.5

0.5730

 

 

DNL04S0A0R16P A/B/C

 

 

1.8

0.5220

 

 

DNL04S0A0R16N A/B/C

 

 

 

2.5

0.4030

 

 

 

 

 

 

 

 

3.3

0.2670

 

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Delphi DNM and DNL Series of SIP type POL converters PurposeRelevant Documentation Equipment Set-Up and Description Equipment RequiredThermal Management of the Converter Test Set-Up Tests PerformedSW3 Function table Initial Power UpTests and Evaluation TestNo Load Input Current Test Output Characteristics Line Regulation Load RegulationOutput Ripple 10500 Vtrim = 0.7 − 0.1698 ⋅ Vout − For DNM04xx and DNL04xx seriesVoltage Margining For DNM12xx and DNL12xx seriesDetailed Description Sequential Implementation Voltage TrackingRatio-Metric Implementation PS1 PS2PS1=5V VrefSimultaneous Implementation PS1=5V PS2=3.3VVref definition Voset,ps2 Test Dynamic Characteristics Output Voltage DeviationTest Turn on the module by using the external switch Test Turn on the module by using the Enable on/offTurn-On Response Time Thermal Characteristic Efficiency Appendix A- Evaluation Board Schematic Warranty

DNM, DNL SIP Series specifications

Delta Electronics has long been recognized as a leading provider of power and thermal management solutions, and their DNL SIP Series and DNM series converters are exemplary products that exemplify the company’s commitment to innovation and efficiency. Designed specifically for industrial applications, these power supplies offer a range of features that cater to the demands of modern electronic systems.

The DNL SIP Series is a highly integrated, compact power converter that provides a reliable solution for various applications, including communication equipment, industrial automation, and IoT devices. One of its standout features is its high power density, which allows for a significant reduction in space requirements without compromising on performance. This is particularly advantageous in applications where space is at a premium.

Another important characteristic of the DNL SIP Series is its wide input voltage range, accommodating different operating environments and ensuring versatility across diverse applications. The series also boasts high efficiency ratings, often exceeding 90%. This high efficiency translates into reduced energy consumption, lower operating costs, and less heat generation—factors that are crucial in both environmental sustainability and system longevity.

On the other hand, the DNM series is tailored for more demanding applications that require robust performance in even harsher conditions. This series blends advanced technology with an expanded thermal management system, allowing for operation in extreme temperatures and ensuring reliability in challenging environments. The DNM’s rugged design not only enhances its durability but also contributes to user safety, featuring protections against over-voltage, over-current, and short circuits.

Both the DNL SIP and DNM series leverage Delta Electronics’ cutting-edge manufacturing processes and adherence to international safety standards. This ensures that their products meet rigorous quality controls and are certified for use in a variety of industrial settings. Integration with communication protocols and smart features allows for quick diagnostics and monitoring, enabling users to optimize performance and address issues before they escalate.

In summary, Delta Electronics’ DNL SIP Series and DNM converters stand out due to their compact design, high efficiency, wide input voltage range, and robust protection features. They cater to a wide array of industrial applications, making them an excellent choice for engineers and designers seeking reliable power solutions in an increasingly complex electronic landscape.
Top Page Image Contents