Delta Electronics LCP-1250A4FSRH specifications DescriptionApplications, Performance

Page 1

RoHS Compliant Small Form Factor Pluggable Transceiver for Gigabit Ethernet and Fiber Channel

FEATURES

z Compliant with SFP Transceiver MSA specification

z Compliant with Specifications for IEEE 802.3z/Gigabit Ethernet

z LCP-1250Bxxx compliant with the 1.0625GBd

Fiber Channel 100-SM-LC-L FC-PI Rev.13

z LCP-1250Axxx compliant with the 1.0625GBd

Fiber Channel FC-PI 100-M5-SN-I Rev.13

z Compliant with Industry Standard RFT

Electrical Connector and Cage

z Single + 3.3V Power Supply and TTL Logic

Interface

z EEPROM with Serial ID Functionality

z Laser Class 1 Product which comply with the requirements of IEC 60825-1 and IEC 60825-2

z Duplex LC Connector interface

DescriptionApplications

The LCP-1250xxxx series are hot pluggable 3.3V Small-Form-Factor transceiver module

designed expressly for high-speed communication applications that require rates of up to 1.25Gbit/sec. It is compliant with the Gigabit Ethernet standards, as well as the SFP Multisource Agreement (MSA).

The LCP-1250xxxx transceivers provide with the LC receptacle that is compatible with the industry standard LC connector. The transceiver is also compatible with industry standard RFT connector and cage.

The post-amplifier of the LCP-1250xxxx also includes a LOS (Loss Of Signal) circuit that provides a TTL logic-high output when an unusable optical signal level is detected.

The LCP-1250xxxx transceiver is a Class 1 eye safety product. The optical power levels, under normal operation, are at eye safe level.

zGigabit Ethernet

zFibre channel

zSwitch to Switch interface

zSwitched backplane applications

zFile server interface

Performance

zLCP-1250A4FSxx Data Link up to 550m in 50/125μm Multi Mode Fiber

zLCP-1250B4QSxx Data Link up to 10km in 9/125μm Single Mode Fiber

1

Nov., 2006

 

Rev. 0C

DELTA ELECTRONICS, INC.

www.deltaww.com

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Performance DescriptionApplicationsAbsolute Maximum Ratings Electrical CharacteristicsRecommended Operating Conditions TjrxMask of the eye diagram for the optical transmit signal Optical Characteristics LCP-1250A4FSRTjtx RINOptical Characteristics LCP-1250B4QSR LOS Open PLD / PAL Package Outline Drawing for Metal Housing with Bail de-latch Txfault TxdisableSFP timing parameters for SFP management SFP timing parameters Address EMI Regulatory ComplianceRelated Product Ordering information for SFP modules

LCP-1250A4FSRT, LCP-1250A4FSRH, LCP-1250A4FSR specifications

Delta Electronics has established itself as a leader in the power supply industry, and its LCP-1250A4FSRH, LCP-1250A4FSR, and LCP-1250A4FSRT models showcase cutting-edge technology and reliability for various applications. These power supplies are designed to meet the demanding requirements of contemporary electronic systems, especially in data centers, telecommunications, and industrial applications.

One of the most prominent features of these models is their high efficiency. With efficiencies typically above 94%, users can benefit from reduced energy costs and minimized heat generation, which is paramount in high-density environments. This efficiency also contributes to lower carbon footprints, aligning with global sustainability goals.

The LCP series is equipped with advanced power management capabilities, allowing for effective load sharing and redundant operation. This is particularly important in mission-critical applications where reliability cannot be compromised. The units support N+1 redundancy, ensuring that even if one unit fails, the remaining units can take over seamlessly without disrupting the system.

In terms of design, these power supplies feature a modular approach, which allows for easy scalability. Users can configure their systems according to their specific power requirements by adding or removing modules as needed. This modularity, coupled with hot-swappable capabilities, enables quick maintenance and upgrades without downtime, enhancing overall system resilience.

The LCP-1250A4FSRH, LCP-1250A4FSR, and LCP-1250A4FSRT models come equipped with sophisticated monitoring and control technologies. Users can track performance metrics through various interfaces, ensuring that the power supply operates optimally under different loads. The power supplies also feature built-in protection mechanisms against overcurrent, overvoltage, and thermal events, safeguarding both the equipment and the power supply itself.

Another significant characteristic is their compact design, which allows integration into space-constrained environments. The units are engineered to maximize airflow, thereby minimizing thermal build-up and enhancing performance stability.

In summary, Delta Electronics' LCP-1250A4FSRH, LCP-1250A4FSR, and LCP-1250A4FSRT are exemplary power supply solutions that combine efficiency, reliability, and scalability. With their advanced features and robust technologies, they are ideally suited for high-performance applications requiring consistent and dependable power delivery. These models not only meet today's demands but are also designed to adapt to the future needs of evolving electronic systems.
Top Page Image Contents